Bandit Fishing Lure Buying Guide
Bandit fishing lures are crankbaits built around a tight, wide-wobble action and a square or deep-diving lip, with the primary trade-off being dive depth and bill durability versus casting distance and hook quality. Decide by matching the lure's running depth to your target strike zone and replacing stock trebles with saltwater-grade hooks for brackish or heavy-cover use.
Dive Depth Series:100=2-4 ft, 200=5-8 ft, 300=8-12 ft, 350=12-16 ftBill Type:Square-bill shallow vs round-bill deepBody Material:Hard ABS plastic with molded billStock Hook Size:#4 to #6 treble, freshwater-grade
At a glance
- Price range
- Price range not synced yet
- Category
- Fishing Hooks, Lures & Baits
- Data updated
- Nov 18, 2026
Current offers
Highlights
- Bandit 100/200/300/350 series share the same body but differ by bill length: 100 is square-bill shallow (2-4 ft), 200 medium (5-8 ft), 300 deep (8-12 ft), 350 extra-deep (12-16 ft).
- Square-bill models deflect off rock and timber better because the bill angle is near 45 degrees; round-bill deep divers track straighter at high speed but snag more.
- Stock Bandit lures ship with #4 to #6 treble hooks on most 2- to 3-inch models; upgrading to 2X-strong trebles adds about 0.1 oz and slightly slows rise on pause.
- Bandit bodies are hard ABS plastic with a molded circuit-board-style bill on many deep models; the bill-to-body joint is the first failure point after repeated ledge contact.
Best use cases
- Pick the Bandit 100 square-bill for shallow flats, riprap banks, and dock edges under 4 ft — skip deep divers here because they plow bottom and snag.
- Choose the Bandit 300 or 350 round-bill for ledges, points, and channel drops in 8-16 ft; use a 7-foot medium-heavy rod and 12- to 15-lb fluorocarbon to reach depth.
- For bass in stained water, select the wider-wobble 200 series in chartreuse or firetiger; for clear water, downsize to the 100 in natural shad or ghost patterns.
- Wrong fit: surf or saltwater jetty fishing — Bandit trebles and split rings are freshwater-grade and corrode quickly; use saltwater-specific deep divers instead.
Buying tips
- Match bill length to depth: every extra 1/4 inch of bill adds roughly 2-3 ft of running depth with 10-lb fluorocarbon; use the 100 for 2-4 ft, 200 for 5-8 ft, 300 for 8-12 ft.
- Line diameter changes depth by about 15 percent: 10-lb mono runs shallower than 12-lb fluoro, so size down line if you need the 300 to hit 12 ft.
- Replace stock split rings with #3 or #4 stainless rings rated at least 30 lb when fishing around timber or hydrilla; stock rings deform under a strong hookset.
- Buy colors by water clarity: opaque chartreuse and firetiger for less than 2 ft visibility, translucent shad and ghost for clear water, and red craw for spring prespawn.
Specs
| Dive Depth Series | 100=2-4 ft, 200=5-8 ft, 300=8-12 ft, 350=12-16 ft |
|---|---|
| Bill Type | Square-bill shallow vs round-bill deep |
| Body Material | Hard ABS plastic with molded bill |
| Stock Hook Size | #4 to #6 treble, freshwater-grade |
Related searches
What to check before buying
- Confirm your rod's lure rating covers 1/4 to 1/2 oz; Bandit 100 weighs about 1/4 oz and the 350 about 1/2 oz, so a medium-light rod handles shallow models and a medium-heavy handles deep.
- Check your reel's line capacity for at least 120 yards of 12-lb fluorocarbon if you plan to throw the 300 or 350 series on long casts.
- Verify your target water depth with a sonar reading or contour map before choosing a bill length; a 350 in 6 ft of water will dig bottom and snag.
- Inspect the bill-to-body seam and hook hangers on arrival; reject any lure with a visible gap at the bill joint because it will fail under load.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 18, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
