60 Degree Wedge Buying Guide
A 60-degree wedge is the highest-lofted scoring club in the bag, built to launch the ball steeply and stop it quickly on firm greens, deep rough, and tight lies. The core trade-off is bounce and grind versus versatility: high-bounce wide soles resist digging in soft sand, while low-bounce narrow grinds demand clean contact and reward skilled hands. Buy a 60 only if your wedge set has a clear loft gap below your sand wedge and your home course has firm turf or bunkers deeper than 3 inches; otherwise a 56-degree sand wedge covers more shots for most mid-handicappers.
At a glance
- Price range
- Price range not synced yet
- Category
- Golf Clubs & Club Fitting
- Data updated
- Nov 19, 2026
Current offers
Highlights
- Loft runs 58-62 degrees in the modern 60 class; 60 is the standard gap-filler when your sand wedge is 54-56 and your pitching wedge is 44-48.
- Bounce options split into low (4-8 deg) for firm turf and tight lies, mid (8-12 deg) for neutral conditions, and high (12-14+ deg) for soft sand and steep attack angles.
- Grind geometry matters as much as bounce: heel relief and trailing-edge relief let you open the face without raising the leading edge off the ground.
- Head material is typically 8620 carbon steel or cast stainless; forged carbon steel offers softer feel and bending for lie/loft adjustment, while cast heads hold loft more consistently.
Best use cases
- Pick a 60/10 mid-bounce with a versatile C-grind if you play parkland courses with medium sand and want one wedge for chips, pitches, and greenside bunkers.
- Pick a 60/04-06 low-bounce with heel relief if your home course has firm, tight lies and shallow bunkers, and you already strike wedges with a shallow attack angle.
- Skip the 60 entirely if your lowest wedge is a 56 sand wedge and your handicap is above 18; a 56/12 sand wedge and a 50 gap wedge cover more scoring shots with fewer fat and thin misses.
- Choose a 60/14 wide-sole high-bounce if you play soft, wet turf or deep fluffy sand and tend to take divots; the wide sole prevents the leading edge from digging.
Buying tips
- Set your loft gap first: if your pitching wedge is 44-46 degrees, use a 50-52 gap wedge and a 56 sand wedge, then add the 60 as a fourth wedge only if you have a free slot.
- Match bounce to turf, not to tour preference: soft, lush courses need 12+ degrees of bounce, firm links-style turf needs 4-8 degrees, and neutral parkland fits 8-12.
- Choose a forged carbon steel head if you plan to adjust lie angle or bend loft by 1-2 degrees; cast 17-4 or 8620 heads are harder to bend and can crack at the hosel.
- Verify shaft flex and weight against your irons: a 60-degree wedge with a 130g stiff shaft swings very differently from a 90g regular, so match weight to your wedge-swing tempo.
Specs
| Loft Range | 58-62 deg (60 standard) |
|---|---|
| Bounce Options | Low 4-8 / Mid 8-12 / High 12-14+ |
| Grind Types | C, S, M, low-bounce heel relief |
| Head Material | Forged 8620 carbon vs cast stainless |
Related searches
What to check before buying
- Measure the loft of your current lowest wedge (pitching, gap, or sand) and confirm at least a 4-6 degree gap before adding a 60.
- Check your home course sand depth and turf firmness: deep soft sand favors 12-14 bounce, firm thin turf favors 4-8 bounce.
- Confirm your wedge shaft weight and flex matches your iron set or your preferred wedge tempo, typically 90-130g.
- Verify you have a free club slot: the USGA 14-club limit means adding a 60 usually requires dropping a long iron or hybrid.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 19, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
