Chipper Golf Club Buying Guide
A chipper golf club is a single-purpose short-game club engineered to replace the bump-and-run and fringe chip with a putting-style stroke, typically built at 35–37 inches with a wide, low-bounce sole and 30–45 degrees of loft. The core trade-off is between a putter-like face angle (for clean turf contact) and enough loft to lift the ball over fringe grass, and the decision rule is simple: choose a chipper with a sole width and bounce matched to your home course's fringe thickness and turf firmness, and skip any model whose loft and lie cannot be adjusted to your putting setup.
At a glance
- Price range
- Price range not synced yet
- Category
- Golf Clubs & Club Fitting
- Data updated
- Nov 16, 2026
Current offers
Highlights
- Chippers use 30–45 degrees of loft with 2–6 degrees of bounce; lower loft (30–35) suits tight lies and firm fairways, higher loft (40–45) suits fluffy fringe and soft turf.
- A 35–37 inch shaft length and putter-style grip let you use a vertical pendulum stroke, while lie angles of 68–72 degrees keep the sole flat without digging.
- Head weight typically runs 300–360 grams with a wide, cambered sole; a heavier head (340g+) stabilizes the stroke but requires firmer turf to avoid fat contact.
- Most chippers are single-club designs with fixed hosel or adjustable lie; adjustable models (e.g., lie sleeves) let you match your putting posture, while fixed models demand a fitting check.
Best use cases
- Best fit: players who chip with a putting stroke and struggle with wedge fat/thin contact on fringe grass — pick a 35–37 inch, 35–40 degree chipper with moderate bounce (4–6 degrees).
- Wrong fit: low-handicap players comfortable with a 56–60 degree wedge and open-face technique — a chipper adds a club without replacing a wedge, so skip it.
- Best fit: links-style firm fairways and tight lies — choose 30–35 degrees loft with low bounce (2–3 degrees) to prevent skulled chips.
- Wrong fit: deep rough or thick collars — a chipper's wide sole and low mass will snag; use a hybrid or high-bounce wedge instead.
Buying tips
- Measure your putting stance: a chipper's length should match your putter (33–36 inches for most adults); if it's 2+ inches longer, your posture will force a steep swing and fat contact.
- Match loft to fringe height: 30–35 degrees for fringe under 1 inch, 40–45 degrees for fringe over 1.5 inches; a single 38-degree model is the compromise for mixed conditions.
- Check lie angle: standard chippers are 70–72 degrees; if your putter lie is flatter (68–69) or upright (73+), choose an adjustable-hosel model or have the lie bent by a pro shop.
- Prioritize a wide, cambered sole (sole width 1.5–2 inches) with rounded leading edge; this is the primary design feature that prevents digging on chips.
Specs
| Loft Range | 30–45 degrees (bump-and-run) |
|---|---|
| Sole Bounce | 2–6 degrees (turf dependent) |
| Shaft Length | 35–37 inches (putter-style) |
| Head Weight | 300–360 grams (wide sole) |
Related searches
What to check before buying
- Measure your putter length and grip style — a chipper should feel like your putter, so confirm 33–36 inch length and a putter-style grip before buying.
- Check your home course fringe: walk the collars and note grass height (under 1 inch vs over 1.5 inches) to choose loft and bounce.
- Confirm turf firmness: firm, links-style turf needs low bounce (2–3 degrees); soft, parkland turf needs 4–6 degrees to avoid digging.
- Verify the club's adjustable features: fixed hosel requires a lie/loft fitting, while adjustable sleeves let you match your putting posture without bending.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
