Taylormade Putter Buying Guide
TaylorMade putters span blade, mallet, and high-MOI Spider designs, with the core trade-off being alignment forgiveness versus feel and face-control precision. Durable, consistent performance comes from a milled or insert face matched to your stroke path and green speed, not from marketing tier names. Choose a high-MOI mallet for straight-back-straight-through strokes and a traditional blade for arcing strokes; skip oversized counterbalanced models unless you have a confirmed need for added stability.
At a glance
- Price range
- Price range not synced yet
- Category
- Golf Clubs & Club Fitting
- Data updated
- Nov 19, 2026
Current offers
Highlights
- Spider mallet heads use high-MOI perimeter weighting and often a Pure Roll insert for consistent forward roll; traditional blades use milled steel faces for feedback.
- Face insert generation matters: Pure Roll (white) vs Pure Roll Surfeit (grey) change sound and roll; older AGS inserts feel firmer and less forgiving on off-center hits.
- Shaft and grip specs: stock steel shafts are 33-35 inches; SuperStroke or TaylorMade pistol grips change swing weight and hand position, so match grip size to hand length.
- Adjustable sole weights on Spider GT and Tour models let you tune head weight (typically 350-365g) to counterbalance length and grip changes.
Best use cases
- Best fit: players with a straight-back-straight-through stroke should pick a face-balanced Spider mallet (e.g., Spider GT Max) for maximum stability on 5-10 foot putts.
- Best fit: arcing-stroke players who value distance control should pick a blade-style TaylorMade putter (e.g., TP Collection Soto) with a milled face and toe hang.
- Wrong fit: avoid counterbalanced or 38-inch+ Spider models unless you have a confirmed upright posture and tall frame; they reduce feel on short putts for most golfers.
- Skip adjustable-weight mallets if you never tune swing weight; fixed-weight Spider models save setup time and cost without losing alignment forgiveness.
Buying tips
- Match putter length to wrist-to-floor measurement: 32-34 inches for heights under 5'6", 34-35 inches for 5'6"-6'0", and 35-36 inches for taller players; stock 35-inch fits most average adults.
- Choose toe hang for your stroke: face-balanced (0° toe hang) for straight strokes, 30-45° toe hang for slight arc, and 60°+ for strong arc; Spider mallets are typically face-balanced.
- Confirm grip diameter: standard pistol grips suit hand length under 7.5 inches; midsize or SuperStroke 2.0/3.0 grips reduce wrist action for players with hand length over 8 inches.
- Verify insert type before buying: Pure Roll inserts favor consistent roll on slow greens; milled steel faces favor feedback and control on fast greens above 10 on the Stimpmeter.
Specs
| Head Style | Blade / Mallet / High-MOI Spider |
|---|---|
| Face Type | Milled steel / Pure Roll insert |
| Toe Hang | Face-balanced (0°) to 60°+ |
| Stock Length | 33-36 in (35 in standard) |
Related searches
What to check before buying
- Measure your current putter length and lie angle; TaylorMade stock lie is 70°, and adjusting more than 2° requires a bending tool or factory service.
- Check your stroke path on a putting mat or launch monitor to confirm face-balanced vs toe-hang need before choosing a Spider or blade model.
- Confirm shaft diameter compatibility: TaylorMade putters use 0.370-inch tip diameter for most models; aftermarket shafts must match or require a shim.
- Verify grip weight: stock TaylorMade grips are 55-85g; replacing with a heavier grip alters swing weight by 2-4 points, so recheck head weight feel.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 19, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
