Taylormade Wedge Set Buying Guide
A TaylorMade wedge set is a matched trio of short-game clubs (typically 50–52° gap, 54–56° sand, and 58–60° lob) engineered around TaylorMade's Milled Grind (MG) sole grinds and face-milling technology. The core trade-off is between the MG series' raw-face spin and grind versatility versus older cast or clone-style wedges that wear faster and lack bounce options. Buy a set only when the lofts gap cleanly from your irons' pitching wedge; otherwise buy individual lofts.
At a glance
- Price range
- Price range not synced yet
- Category
- Golf Clubs & Club Fitting
- Data updated
- Nov 19, 2026
Current offers
Highlights
- MG4 and MG3 use a raw 8620 carbon steel face with laser-etched micro-ribs; raw faces rust and maintain spin longer than chrome-plated faces.
- Three sole grinds define turf interaction: Low Bounce (LB) for firm links turf, Standard (SB) for neutral conditions, and High Bounce (HB) for soft or steep attacks.
- MG4 offers four grind/bounce options (LB, SB, HB, TW) versus MG3's three; the TW grind adds heel/toe relief for open-face flop shots.
- Stock shaft is True Temper Dynamic Gold S200 (129g) at standard length; lighter 105g steel or graphite options suit slower tempos and reduce fatigue.
Best use cases
- Pick a 3-wedge MG4 set (50/54/58) if your pitching wedge is 44–46° and you want even 4–6° loft gaps through the scoring clubs.
- Skip the set and buy a single 56° HB wedge if you play soft, wet turf or have a steep attack angle—set-standard SB grinds will dig.
- Choose raw-face MG4 over chrome if you practice frequently and want maximum groove life; chrome is only preferable if you dislike rusted faces.
- Wrong fit: buying a 52/56/60 set when your PW is 43° creates a 9° gap—instead buy a 48° gap wedge plus 54/58.
Buying tips
- Measure your pitching wedge loft; the gap wedge should be 4–6° stronger than your PW, not a fixed 50° across all iron sets.
- Match wedge shaft weight to your iron shafts: 120–130g steel for DG/X100 players, 100–110g for lightweight steel or graphite iron sets.
- Prefer raw or unplated faces for spin retention; chrome plating smooths micro-grooves faster after repeated sand shots.
- Check bounce against your attack angle: steep diggers need 12–14° bounce (HB), shallow sweepers need 8–10° (LB).
Specs
| Loft Set Options | 50/54/58 or 52/56/60 |
|---|---|
| Face Material | Raw 8620 carbon steel |
| Sole Grinds | LB / SB / HB (MG3); +TW (MG4) |
| Stock Shaft | True Temper DG S200 129g |
Related searches
What to check before buying
- Measure your PW loft and current wedge gaps; write down target lofts (e.g., 50/54/58) before choosing a set.
- Know your turf: firm/dry fairways favor LB (8–10° bounce); soft/wet or fluffy sand favors HB (12–14°).
- Confirm shaft flex and weight match your irons to avoid a mid-set feel change; DG S200 is stiffer than typical game-improvement iron shafts.
- Verify grip size and lie angle; TaylorMade wedges are standard lie and can be bent ±2° by any pro shop after purchase.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 19, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
