Almost Skateboard Deck Buying Guide
Almost skateboard decks are pro-grade 7-ply maple boards from a rider-owned brand known for consistent pop and durable resin construction. The key trade-off is between standard 7-ply maple and lighter impact/ carbon-layer decks, which affect flick, durability, and price. Choose based on width, construction tier, and your actual skating terrain—not graphic hype.
Construction:7-ply maple / carbon / impactWidth Range:7.75"–8.5"Wheelbase:14"–14.5"Deck Length:31.5"–32.5"
At a glance
- Price range
- Price range not synced yet
- Category
- Skateboard Decks
- Data updated
- Nov 16, 2026
Current offers
Highlights
- Almost decks use 7-ply North American maple with resin glue for consistent pop and moisture resistance; some tiers add carbon fiber or impact plates for reinforced ollie zones.
- Widths range from 7.75" to 8.5" in 0.125" increments; wider decks suit transition and larger feet, narrower decks suit technical street flip tricks.
- Almost's 'Impact' and 'Carbon' constructions add a carbon fiber layer or impact plates at nose/tail, reducing breakage but slightly stiffening flex compared to standard 7-ply.
- Deck length and wheelbase vary by model: street-oriented shapes typically 31.5-32" long with 14-14.25" wheelbase; wider shapes run up to 32.5" with 14.5" wheelbase.
Best use cases
- Pick a standard 7-ply Almost deck in 8.0-8.25" for all-around street and park skating if you want predictable pop and moderate durability at a lower cost.
- Choose an Almost Impact or Carbon deck in your preferred width if you frequently break decks at the nose/tail or skate large gaps and handrails—the reinforcement adds lifespan.
- Skip Almost's narrower sub-8.0" shapes if you have shoe size US 10+ or skate transition; these are best for technical street skaters with smaller feet.
- Avoid carbon-layer decks if you prioritize maximum flex and board feel for flatground tech—standard 7-ply maple gives more forgiving flex for manuals and flip tricks.
Buying tips
- Match deck width to shoe size: US 8-9 → 7.75-8.0"; US 9-10.5 → 8.0-8.25"; US 10.5+ → 8.25-8.5". Width drives leverage and flick feel more than brand.
- Verify wheelbase: under 14.25" suits street flip tricks; 14.25-14.5" suits transition and stability at speed. Deck length should match your stance—shorter for tech, longer for bowls.
- Inspect construction tier: standard 7-ply maple is the baseline; carbon or impact layers cost more but resist chip-outs and breakage. Resin glue (vs. water-based) improves moisture resistance.
- Check truck compatibility: deck width should match truck axle width within 0.125" (e.g., 8.25" deck with 8.25" trucks). Mismatched widths cause odd turn feel and uneven wear.
Specs
| Construction | 7-ply maple / carbon / impact |
|---|---|
| Width Range | 7.75"–8.5" |
| Wheelbase | 14"–14.5" |
| Deck Length | 31.5"–32.5" |
Related searches
What to check before buying
- Measure your current deck width and wheelbase if you like its feel—match or adjust by 0.125" (width) or 0.25" (wheelbase) when buying Almost.
- Confirm your truck axle width matches the deck width within 0.125"; trucks wider or narrower than the deck cause handling quirks.
- Check your local terrain: rough concrete favors standard 7-ply for flex; smooth parks and gaps favor carbon/impact for durability.
- Verify you have the right hardware: deck bolts (1" for no risers, 1.25" with risers) and grip tape sized to deck width.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
