Trail Gear Advisor

Photos from current listings. Actual item, color, and included accessories may vary.

Blind Skateboard Deck Buying Guide

A Blind skateboard deck is a 7-ply maple popsicle deck from the heritage brand Blind (founded under Steve Rocco's World Industries umbrella), known for reissue graphics and team models in modern popsicle shapes. The core trade-off is not brand cachet but construction: standard 7-ply North American maple with epoxy vs. cheap 7-ply with weaker glue and inconsistent concave, which decides pop life and snap resistance. The decision rule is simple: buy a Blind deck in your measured width with a consistent concave and certified maple plies; skip any listing that cannot state width, ply count, and wood source.

Construction:7-ply maple, epoxy glueDeck Width:7.75-8.5 in popsicleWheelbase:14.0-14.5 in by sizeConcave:Steep / medium / mellow molds
Typical price range$189.99

At a glance

Category
Skateboard Decks
Data updated
Nov 16, 2026

Current offers

Highlights

  • Blind decks use 7-ply maple construction; modern popsicle shapes run 8.0-8.5 in wide with 14.0-14.5 in wheelbases for street and park riding.
  • Width tiers matter: 7.75-8.0 in suits street and technical skating, 8.25-8.5 in suits transition, parks, and larger feet.
  • Reissue and team graphic decks are the same maple construction; graphic rarity affects collectibility, not pop or durability.
  • Concave and kick steepness vary by mold; consistent concave across a production run is the real quality marker vs. no-name decks.

Best use cases

  • Street and ledge skating: pick an 8.0-8.25 in Blind deck with a steep concave for flick and a 14.25 in wheelbase; skip 8.5+ widths that slow flip tricks.
  • Park and transition: pick an 8.25-8.5 in deck with a 14.5 in wheelbase and medium concave for stability on ramps; skip narrow 7.75 in street shapes.
  • Collecting reissues: pick graphic reissue decks and display them; skip riding rare prints since graphic value does not improve skate performance.
  • First-time deck swap: match your existing trucks' axle width to deck width (trucks within 0.25 in of deck width); skip buying a deck wider than your current trucks.

Buying tips

  • Measure your current deck width at the widest point; buy within 0.25 in of that unless deliberately sizing up for transition.
  • Match truck axle width to deck width: 8.0 in deck pairs with 139-144 mm trucks, 8.25 in with 144-149 mm, 8.5 in with 149-159 mm.
  • Confirm 7-ply maple construction and epoxy glue; decks listed only as 'wood' or with unknown ply counts are the compromise tier.
  • Check wheelbase: 14.0-14.25 in for street, 14.25-14.5 in for park/transition; wheelbase changes pop timing more than graphic or brand.

Specs

Construction7-ply maple, epoxy glue
Deck Width7.75-8.5 in popsicle
Wheelbase14.0-14.5 in by size
ConcaveSteep / medium / mellow molds

Related searches

What to check before buying

  • Know your deck width: measure an existing deck edge-to-edge at the widest point before ordering.
  • Check truck compatibility: axle width within 0.25 in of deck width, and confirm your truck brand's sizing chart.
  • Confirm hardware length: 7/8 in bolts for standard no-riser setups; 1 in bolts if adding riser pads.
  • Grip tape and assembly: budget for a sheet of grip tape and a fresh set of bearings if reusing wheels from an old setup.

FAQ

All Skateboard Decks buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.