Metallica Skateboard Deck Buying Guide
Metallica skateboard decks are officially licensed or themed boards that combine band artwork with standard skateboard deck construction. The primary trade-off is between collector-grade graphics on quality 7-ply maple versus cheap display-only decks that delaminate under real riding. The decision rule: buy a deck with a known woodshop and standard truck-hole pattern if you plan to skate, or accept a wall-hanger only if the graphic is the sole priority.
At a glance
- Price range
- Price range not synced yet
- Category
- Skateboard Decks
- Data updated
- Nov 16, 2026
Current offers
Highlights
- Official Metallica decks are licensed through major distributors and typically use 7-ply North American or Canadian maple with single or dual pressed concave.
- Deck widths range from 7.5" to 8.5" popsicle shapes; graphic series often follow album anniversaries (e.g., Master of Puppets, Ride the Lightning) with limited runs.
- Standard truck hole pattern is 8.0" to 8.5" axle width; decks use either 2.125" or 2.25" truck mounting holes with 3/8" hardware.
- Cheap licensed novelties often use 5-ply birch or bamboo with flat concave and no kicktail reinforcement—prone to delamination and razor tail.
Best use cases
- Buy a 7-ply maple Metallica deck in 8.0"–8.25" if you skate street or park and want band art that survives ollies and board slides.
- Choose a 8.5"–8.75" wider deck for transition or cruiser setups with 169mm trucks; skip 7.5" narrow decks unless you are a youth skater.
- Skip any deck under 7-ply maple if you weigh over 150 lbs or skate gaps—5-ply birch flexes and chips at the tail within weeks.
- For wall display only, a cheaper graphic deck is acceptable, but verify it has a drilled truck pattern if you ever plan to mount trucks.
Buying tips
- Match deck width to shoe size: 7.5"–7.75" for US 6–8, 8.0"–8.25" for US 8.5–10, 8.5"+ for US 10.5+ or transition skating.
- Check the truck hole pattern: standard is 2.125" (54mm) center-to-center; odd patterns require re-drilling and weaken the deck.
- Confirm 7-ply maple construction; 5-ply birch or bamboo decks are display-only and will delaminate under 150 lbs of rider weight.
- Look for a single or dual kicktail with steep or mellow concave; steep concave grips better for tech tricks, mellow is stable for cruising.
Specs
| Deck Construction | 7-ply maple vs 5-ply birch |
|---|---|
| Deck Width | 7.5"–8.5" popsicle |
| Truck Hole Pattern | 2.125" (54mm) standard |
| Graphic Series | Album art limited runs |
Related searches
What to check before buying
- Measure your stance width and shoe size to pick deck width; stand on a ruler to see if your feet overhang a 7.75" deck.
- Verify your trucks match the deck width: 129mm–139mm for 7.5"–8.0", 149mm for 8.25", 159mm–169mm for 8.5"+.
- Check wheelbase (14"–15" typical) against your height; shorter wheelbase flips faster, longer is stable at speed.
- Confirm the deck is not a 'complete' with low-grade trucks if you already own quality trucks—buy deck-only to avoid wasted parts.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
