Santa Cruz Skateboard Complete Buying Guide
Santa Cruz complete skateboards are factory-assembled setups pairing the brand's deck geometry with mid-tier trucks, bearings, and wheels, aimed at riders who want a ready-to-ride board without custom assembly. The core trade-off is deck construction and truck grade: entry completes use softer 7-ply maple and generic trucks, while pro-tier completes use stiffer 7-ply or 8-ply maple with branded trucks and higher-abrasion wheels. The decision rule: buy a complete only when the deck width matches your shoe size and intended terrain, and upgrade bearings and bushings first if you ride daily.
At a glance
- Price range
- Price range not synced yet
- Category
- Skateboard Decks
- Data updated
- Nov 16, 2026
Current offers
Highlights
- Deck construction: 7-ply North American maple is standard; pro-tier completes use stiffer glue and tighter grain for pop retention, while budget tiers use softer maple that razors faster.
- Truck grading: entry completes ship with generic aluminum trucks and soft bushings; pro completes use branded trucks (e.g., Independent or Krux geometry) with harder urethane bushings for stability at speed.
- Wheel durometer: completes typically ship 52-54mm wheels at 99A-101A for street; cruiser-oriented completes use 56-60mm at 78A-85A for rough pavement and rolling speed.
- Bearing tier: budget completes use ABEC 3-5 steel bearings; pro completes use ABEC 7 or branded bearings with rubber shields for dust resistance and longer roll.
Best use cases
- Best fit: beginner to intermediate street skater — pick an 8.0-8.25 inch complete with 52-54mm 99A wheels and branded trucks; skip cruiser completes with soft wheels if you plan tricks.
- Best fit: park and transition rider — choose an 8.25-8.5 inch deck with stiffer 7-ply maple and 56-58mm 99A-101A wheels; skip 7.5-inch tech decks that feel twitchy at speed.
- Best fit: commuter/cruiser — select a complete with 78A-85A wheels at 56-60mm and riser pads; skip street completes with hard 101A wheels that chatter on rough pavement.
- Wrong fit: riders over 200 lbs — skip entry completes with generic trucks; choose pro-tier completes with forged-baseplate trucks and 8.25+ inch decks for durability.
Buying tips
- Match deck width to shoe size: US 6-8 → 7.5-7.75 in; US 8.5-10 → 8.0-8.25 in; US 10.5+ → 8.25-8.5 in for stable footing and leverage.
- Verify truck axle width matches deck width within 0.25 inch; mismatched axles cause wheel bite or exposed axles and poor turn geometry.
- Choose 99A-101A wheels for smooth skatepark concrete; choose 78A-85A for asphalt and rough pavement, accepting slower trick response.
- Prefer completes with ABEC 7 or branded shielded bearings over ABEC 3-5; bearing shields and grease retention matter more than ABEC rating alone.
Specs
| Deck Construction | 7-ply maple / 8-ply pro tiers |
|---|---|
| Deck Width | 7.5-8.5 in by shoe size |
| Wheel Durometer | 99A-101A street / 78A-85A cruiser |
| Bearing Grade | ABEC 3-5 entry / ABEC 7 pro |
Related searches
What to check before buying
- Measure your current board or stance: deck width 7.5-8.5 in and length 28-32 in must fit your shoe size and riding style before ordering.
- Confirm truck axle width within 0.25 in of deck width and wheel diameter 52-60mm clears the deck without riser pads or with 1/8 in risers as needed.
- Check bearing type and shield: shielded steel bearings resist dust; unsealed bearings require frequent cleaning in wet or dusty climates.
- Verify hardware compatibility: 7/8 in hardware for standard decks without risers; 1 in hardware if adding 1/8 in riser pads for larger wheels.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
