Photos from current listings. Actual item, color, and included accessories may vary.
Tennis Racket Tape Buying Guide
Tennis racket tape splits into two distinct product families: frame protection tape (PU/TPU edge guards that shield the hoop from scrapes) and grip tape (overgrips and replacement grips that control feel and sweat). The core trade-off is adhesive-backed PU/TPU film thickness versus bulk overgrip material—thin frame tape preserves swing weight and cosmetics, while overgrips trade durability for tack and moisture management. Buy frame tape if you drag your hoop on low balls or hard courts; buy overgrips if your handle slips—skip any tape marketed as both.
At a glance
- Category
- Tennis & Racquet Sports
- Data updated
- Nov 16, 2026
Current offers
Highlights
- Frame protection tape uses PU or TPU film, typically 0.3–0.5 mm thick, with acrylic adhesive; TPU resists abrasion better than PVC and peels cleanly without residue.
- Overgrips are thin (0.5–0.75 mm) perforated or embossed PU wraps applied over the original grip; replacement grips are thicker (1.5–2.0 mm) and rebuild handle size.
- Frame tape is sold in pre-cut hoop strips or continuous rolls (roughly 5 m / 16.4 ft); pre-cut strips fit standard 95–100 sq in hoops with less trimming waste.
- Overgrip tack comes from a PU surface layer; perforated versions vent sweat, while smooth high-tack versions suit dry hands and clay.
Best use cases
- Pick pre-cut PU/TPU frame tape if you play hard courts and scrape the hoop on low slices—apply at 10 and 2 o'clock plus the bumper; skip continuous rolls only if you dislike trimming.
- Choose a 3-pack of perforated PU overgrips if you sweat heavily or play humid summer matches—re-wrap every 8–12 hours of play; skip thick replacement grips unless you need to enlarge a too-small handle.
- Buy continuous 16.4 ft frame tape rolls if you string multiple rackets or protective-wrap badminton frames too; skip bulk 100-piece overgrip lots unless you run a club or restring frequently.
- Skip any products labeled 'racket tape' that combine grip and frame functions—they compromise adhesive strength and thickness; buy dedicated frame tape and dedicated overgrips separately.
Buying tips
- Match frame tape width to your frame: 20–25 mm wide strips cover the hoop edge without overhanging; wider tape bunches at the throat and adds measurable swing weight.
- Choose TPU over PVC for frame guards: TPU flexes with frame impact and resists UV yellowing, while PVC cracks and leaves adhesive residue after one season.
- Overgrip thickness maps to feel: 0.5–0.6 mm maximizes direct feedback; 0.7–0.75 mm adds cushioning for arm comfort at the cost of bevel definition.
- For grip size math, each overgrip layer adds roughly one full grip size (about 1/8 inch circumference); apply overgrips only if your bare handle is one size small or you want a replaceable sweat layer.
Specs
| Tape Type | Frame guard vs overgrip |
|---|---|
| Frame Material | PU / TPU film |
| Roll Length | 5 m / 16.4 ft typical |
| Overgrip Thickness | 0.5–0.75 mm |
Related searches
What to check before buying
- Measure your hoop width at 3 and 9 o'clock; confirm frame tape width (typically 20–25 mm) covers the edge without wrapping onto the string bed.
- Check handle size before buying overgrips: if the bare grip is already correct, an overgrip pushes it one size larger—buy thin 0.5 mm wraps or skip.
- Confirm your frame material (graphite, aluminum, composite); acrylic-adhesive TPU tape is safe on all, but rubber-based glues can stain raw graphite.
- Verify roll length or strip count covers your hoop: a standard tennis hoop needs roughly 1.2–1.5 m of edge tape per full wrap.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.


