Photos from current listings. Actual item, color, and included accessories may vary.
OMS IQ Lite Buying Guide
The OMS IQ Lite is a back-inflation, single-bladder wing-style BCD built for singles and light doubles, distinguished by its IQ harness system and U.S. manufacturing. The core trade-off is back-flotation stability and modularity versus the need to size and rig the harness correctly for your tank and exposure suit. Buy it if you want a streamlined, tech-leaning singles/doubles wing with a customizable harness; skip it if you need a jacket-style BCD or an integrated-weight, travel-first design.
At a glance
- Brand
- Not synced yet
- Model
- Not synced yet
- MPN
- Not synced yet
- Category
- BCD & Dive Regulators
- Status
- Offers available
- Data updated
- Nov 16, 2026
Current offers
Highlights
- Back-inflation wing design keeps lift behind the diver for a horizontal trim, unlike jacket BCDs that squeeze the chest.
- OMS IQ harness uses a modular webbing-and-buckle system allowing custom fit and accessory mounting without a fixed jacket cut.
- Single-bladder construction with corrugated inflator and over-pressure relief valve; lift capacity is sized for single or light double tanks.
- U.S.-made OMS quality with replaceable bladder and hardware, supporting long-term service and component-level repair.
Best use cases
- Best fit: single-tank recreational divers who want a streamlined back-inflation BCD with room to add a small pony or light doubles later.
- Best fit: tech-curious divers upgrading from a jacket BCD who want a modular harness and wing that supports doubles with a capacity check.
- Wrong fit: warm-water travel divers seeking an integrated-weight, packable BCD; choose a travel BC with drop weights instead.
- Wrong fit: divers who want fixed, jacket-style chest buoyancy or a BCD with built-in weight pockets as standard.
Buying tips
- Match wing lift to your tank: a single 80 cu ft aluminum tank needs roughly 20-30 lb lift; doubles require checking the wing's rated lift against total negative buoyancy.
- Size the IQ harness by torso length, not chest alone; the crotch strap and shoulder webbing must allow a full exposure suit without restricting reach.
- Confirm the BCD accepts standard 2-inch webbing accessories and a compatible power inflator; OMS uses standard corrugated hose fittings.
- For doubles, verify the wing's central channel and bolt spacing align with your backplate; OMS wings are designed for standard backplate hole patterns.
Specs
| BCD Style | Back-inflation wing / modular harness |
|---|---|
| Bladder Type | Single bladder w/ OPV |
| Harness System | OMS IQ adjustable webbing |
| Tank Config | Single or light doubles |
Alternatives to compare
Related searches
What to check before buying
- Measure your torso length and chest circumference with your exposure suit on; the harness must adjust without bottoming out.
- Confirm your tank type: single cylinder or doubles, and whether your backplate or harness matches OMS wing bolt patterns.
- Check your local dive environment: cold water may require additional lift and a drysuit-compatible inflator setup.
- Verify you have or can add a standard low-pressure inflator hose and accessory D-rings for your configuration.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.







