Photos from current listings. Actual item, color, and included accessories may vary.
Scubapro Air 2 Buying Guide
The Scubapro Air 2 is a combination octopus/inflator regulator that integrates a backup second stage into the BCD power inflator, reducing hoses and streamlining the diver's profile. The primary trade-off is between the convenience of a single integrated unit and the redundancy of a traditional separate octopus with a dedicated hose. The decision rule is simple: choose the Air 2 if you prioritize a clean, minimalist rig and practice air-sharing drills; avoid it if you regularly dive with task-loaded or panicked buddies who need a conventional octopus presentation.
At a glance
- Brand
- Not synced yet
- Model
- Not synced yet
- MPN
- Not synced yet
- Category
- BCD & Dive Regulators
- Status
- Offers available
- Data updated
- Nov 16, 2026
Current offers
Highlights
- Air 2 combines a balanced second stage and BCD inflator in one unit, eliminating the separate octopus hose and first-stage LP port.
- Integrated inflator/octopus units use a larger orifice and higher-flow valve than standard inflators to support breathing at depth.
- The Air 2 is designed for use with Scubapro BCDs and compatible inflator hoses; the hose thread and quick-disconnect must match the BCD.
- Air-sharing with an Air 2 requires the donor to breathe from the primary and pass the Air 2 to the buddy, reversing standard donate-primary protocol.
Best use cases
- Best fit: recreational divers using a Scubapro BCD who want a streamlined rig with one less hose and are trained in Air 2 air-sharing procedures.
- Wrong fit: divers who frequently dive with unfamiliar buddies or in classes where standard octopus donation is taught; stick with a conventional octopus.
- Best fit: travel divers counting ounces and packing space; the Air 2 saves a hose and a second-stage assembly.
- Wrong fit: technical or cave divers requiring redundant first stages and fully independent gas supplies; use a separate octopus on its own first stage.
Buying tips
- Confirm your BCD inflator hose uses the standard Scubapro quick-disconnect; Air 2 units are BCD-specific and may not fit other brands without an adapter.
- Match the Air 2 generation to your BCD: older Air 2 models use different valve assemblies and service kits than current versions; buy the version your local service center supports.
- Inspect the second-stage diaphragm and exhaust valve on used units; these wear parts are inexpensive but a torn diaphragm makes the unit unbreathable.
- Verify the Air 2 includes the correct inflator hose and mouthpiece; replacement hoses are standard but the unit is unusable without a compatible BCD connection.
Specs
| Type | Combination octopus/inflator |
|---|---|
| Connection | Scubapro quick-disconnect |
| Compatibility | Scubapro BCDs; adapters limited |
| Service Interval | Annual or 100 dives |
Alternatives to compare
Related searches
What to check before buying
- Measure your BCD inflator hose length and routing; the Air 2 adds bulk at the inflator, so ensure it sits comfortably when deflating.
- Confirm your BCD brand and inflator connection type; Scubapro Air 2 is designed for Scubapro BCDs and some adapters exist but add failure points.
- Check your training and dive buddy expectations; Air 2 air-sharing is not universal, so ensure your buddy knows the procedure.
- Verify local service support for Scubapro regulators; service kits and technician familiarity vary by region.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.







