Bge Pizza Stone Buying Guide
A Big Green Egg pizza stone is a ceramic heat deflector and baking surface designed to fit the Egg's dome and plate setter system for high-temperature hearth-style pizza. The primary trade-off is ceramic thickness and cordierite quality versus price and fit compatibility with your specific Egg model; thin generic stones crack under the Egg's radiant heat, while proper BGE-spec cordierite handles 700°F+ and thermal shock. Buy the correct diameter tier for your Egg size and verify cordierite grade, not just 'ceramic.'
At a glance
- Price range
- Price range not synced yet
- Category
- Pizza Stones & Steels
- Data updated
- Nov 16, 2026
Current offers
Highlights
- BGE stones use cordierite ceramic, which resists thermal shock up to ~1,000°F and is the same material as high-end baking stones; generic 'pizza stone' ceramics often fail above 500°F.
- Stone diameter must match Egg size: Mini/MiniMax ~10-11 in, Small ~13 in, Medium ~15 in, Large ~18 in, XLarge ~21 in; an undersized stone leaves a cold ring and uneven bake.
- BGE-branded stones are designed to sit on the plate setter (convegger) legs-up as a deflector, not directly on the stainless grate; the air gap between plate setter and stone is critical to prevent scorching.
- Thickness matters: BGE stones are roughly 0.6-0.75 in thick; thin 0.25-0.4 in aftermarket stones heat too fast and warp or crack under the Egg's direct radiant heat.
Best use cases
- Best fit: Large or XLarge Egg owner doing 700°F Neapolitan-style pies — buy the 18 in (Large) or 21 in (XLarge) BGE cordierite stone and pair with plate setter legs-up.
- Best fit: Medium Egg owner baking 12-14 in pizzas — the 15 in BGE stone covers the full grate and gives edge-to-edge browning without overhang.
- Wrong fit: Using a generic 12 in hardware-store stone in a Large Egg — it sits too low and small, creating hot spots and a raw center; skip and size up.
- Wrong fit: Putting any stone directly on the stainless grate without a plate setter in a kamado — direct flame contact cracks stones; buy the plate setter/convegger as a companion part.
Buying tips
- Match stone diameter to your Egg model's grate: measure your current grate across the center; the stone should be within 1 in of that measurement for full coverage.
- Confirm cordierite grade — BGE factory stones are cordierite; aftermarket 'ceramic' stones labeled only 'cordierite blend' often contain mullite fillers that crack at 600°F.
- Buy the plate setter (convegger) if you don't own one; the stone is a deflector on top of it, and without the air gap the stone overheats and the crust burns before the top sets.
- Inspect for pre-seasoned vs raw stone: BGE stones ship unseasoned; season with a thin oil bake at 400°F before first pizza to seal pores and prevent sticking.
Specs
| Material Grade | Cordierite ceramic vs generic ceramic |
|---|---|
| Stone Thickness | 0.6-0.75 in (BGE) vs 0.25-0.4 in generic |
| Diameter by Egg | 10-21 in matched to Mini-XLarge |
| Required Companion | Plate setter/convegger (legs-up) |
Related searches
What to check before buying
- Measure your Egg's grate diameter across the center and confirm the stone diameter is within 1 in — undersized stones cause uneven bake and hot spots.
- Confirm you own the plate setter/convegger for your Egg size; the stone requires it as a base with legs-up for the correct air gap.
- Check your dome clearance: a stone on a plate setter sits ~3-4 in below the dome; verify your pizza peel and topping height clear the dome.
- Verify your Egg model generation (older Eggs have slightly different grate diameters) and buy the stone sized for that exact model, not a generic 'Large' assumption.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
