Big Green Egg Pizza Stone Buying Guide
A Big Green Egg pizza stone is a cordierite or ceramic baking plate sized to sit on the EGG's stainless steel grid, converting the kamado into a high-heat deck oven. The core trade-off is thermal shock resistance versus heat transfer speed: thick porous cordierite survives 700°F+ kamado cycling but heats slowly, while thin steel or hybrid plates preheat faster yet demand stricter temperature control. Buy a stone with a verified diameter that clears your EGG's fire ring and a rated ceiling above 650°F; skip any unrated or undersized plate that leaves a wide air gap and causes scorched crusts.
At a glance
- Price range
- Price range not synced yet
- Category
- Pizza Stones & Steels
- Data updated
- Nov 16, 2026
Current offers
Highlights
- Cordierite stone: 0.5–0.75 in thick, rated 700–800°F, low thermal expansion — resists cracking from kamado heat cycling but needs 30–45 min to equalize.
- Steel plate: 0.25–0.375 in carbon steel reaches 600°F deck temps in 15–20 min and sears leopard-spots fast, but warps if cooled quickly.
- Diameter fit: Large EGG uses a 16–18 in stone; Mini Max and Small need 10–13 in; an oversized plate bridges the fire ring and blocks airflow.
- Legacy vs current EGG: older Large EGGs have a narrower fire ring, so measure the inner fire-ring diameter, not just the nominal model name.
Best use cases
- Best fit for classic 700°F Neapolitan bakes on a Large EGG: 16–18 in cordierite stone on the grid with a platesetter below for indirect heat.
- Best fit for weeknight 550°F thin-crust and Detroit-style: carbon steel plate for faster preheat and crisper bottom, paired with a heat deflector.
- Wrong fit: buying a 19–21 in stone for a Large EGG — it rests on the fire ring, chokes airflow, and produces uneven, burnt edges.
- Wrong fit: using an unrated generic ceramic tile or thin 0.2 in stone at 700°F — thermal shock cracks it mid-bake.
Buying tips
- Measure the inner fire-ring diameter first; choose a stone 1–2 in smaller so it sits on the grid, not the ring, and air flows around the edge.
- Match stone thickness to your bake style: 0.5–0.75 in cordierite for high-heat Neapolitan; 0.25–0.375 in steel for fast weeknight pies.
- Confirm the stone's temperature rating exceeds your target dome temp by at least 100°F; cordierite at 700–800°F covers most EGG bakes.
- For steel plates, verify the plate is at least 0.25 in thick; thinner steel warps and loses deck heat under a cold dough load.
Specs
| Stone Material | Cordierite ceramic vs carbon steel |
|---|---|
| Thickness | 0.5–0.75 in ceramic / 0.25–0.375 in steel |
| Heat Rating | 700–800°F cordierite / 600°F+ steel |
| EGG Fit | 16–18 in Large / 10–13 in Small |
Related searches
What to check before buying
- Measure your EGG's inner fire-ring diameter and grid diameter before ordering; the stone must clear the ring and rest flat on the grid.
- Confirm your EGG model: Large uses 16–18 in, Small 10–13 in, Mini Max 10–12 in — matching the plate to the model prevents airflow blockage.
- Check your dome thermometer and gasket condition; a stone rated 700°F+ is wasted if the EGG cannot hold stable heat above 550°F.
- Plan for a platesetter or heat deflector below the stone for indirect baking; direct stone-on-grid setups scorch the bottom before the top sets.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
