Big Green Egg Pizza Wedge Buying Guide
A Big Green Egg pizza wedge is a ceramic heat deflector accessory shaped to sit on the Egg's stainless steel grid, converting a kamado grill into a high-temperature pizza oven. The primary trade-off is ceramic thickness and diameter: thicker, properly sized wedges preheat evenly and resist thermal shock, while thin or undersized wedges cause burnt crusts and cracked plates. The decision rule is simple: buy a wedge sized to your Egg model (MiniMax through 2XL) made from cordierite or alumina ceramic thick enough to hold 600–700°F without warping.
At a glance
- Price range
- Price range not synced yet
- Category
- Pizza Stones & Steels
- Data updated
- Nov 18, 2026
Current offers
Highlights
- Genuine Big Green Egg wedges are cordierite ceramic, roughly 1 inch thick, and sold in model-specific diameters: MiniMax ~10 in, Small ~13 in, Medium ~15 in, Large ~18 in, XL ~21 in, 2XL ~24 in.
- The wedge replaces the standard plate setter (conveggtor) legs-up position, sitting directly on the fire ring; its flat top supports a pizza stone or steel at the grid level for indirect, convective heat.
- Cordierite withstands repeated 700°F+ cycling; thin generic ceramic plates under 0.6 in thick are prone to thermal-shock cracking when a cold dough hits a hot surface.
- A pizza steel (3/8 in or 1/2 in carbon steel) on top of the wedge delivers faster bottom browning than stone, but requires a longer preheat and adds significant weight to the ceramic.
Best use cases
- Best fit: Large or XL Egg owners doing 12–16 inch pizzas at 600–700°F — choose the OEM cordierite wedge plus a 14–16 inch stone or 3/8 inch steel for balanced top/bottom heat.
- Best fit: MiniMax or Small Egg owners making personal 10–12 inch pizzas — pick the model-specific wedge and a stone no wider than the wedge to avoid overhang and tipping.
- Wrong fit: Gas-grill or oven users — the wedge's curved seat and leg pattern are kamado-specific and will not stabilize on flat grates; use a flat stone or steel instead.
- Skip if: You already own a plate setter/conveggtor — a wedge duplicates the indirect setup; add only a pizza stone or steel on top of the existing plate setter.
Buying tips
- Match wedge diameter to Egg model: MiniMax ~10 in, Small ~13 in, Medium ~15 in, Large ~18 in, XL ~21 in, 2XL ~24 in. An oversized wedge will not seat on the fire ring.
- Demand cordierite or high-alumina ceramic at least 0.75–1 inch thick; thinner plates crack under 700°F thermal cycling and uneven kamado heat.
- For steel users, choose 3/8 inch (0.375 in) carbon steel for 12–14 inch pies or 1/2 inch for faster recovery; preheat 30–45 minutes at 550–600°F before launching.
- Verify the wedge is designed for legs-up plate-setter position on your Egg generation; older Eggs with different fire-ring heights may need a spacer or OEM part number confirmation.
Specs
| Egg Model Fit | MiniMax to 2XL (model-specific) |
|---|---|
| Wedge Material | Cordierite / high-alumina ceramic |
| Wedge Thickness | 0.75–1 in (thermal-shock rated) |
| Top Surface | Flat, 10–24 in by Egg model |
Related searches
What to check before buying
- Measure your Egg's fire ring inner diameter and confirm the wedge seats flat without rocking — the wedge must rest on the fire ring, not the grid.
- Check your pizza stone or steel diameter: it should be equal to or slightly smaller than the wedge top to prevent overhang and tipping.
- Confirm your Egg model generation (MiniMax, Small, Medium, Large, XL, 2XL) and purchase the matching OEM or model-specific wedge — a Large wedge will not fit an XL fire ring.
- Ensure you have a high-temp infrared thermometer and a pizza peel sized to your pie; the wedge alone does not include these companion tools.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 18, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
