Cooking Pizza Green Egg Buying Guide
Pizza stones and steels for the Big Green Egg are high-mass cooking surfaces engineered to survive ceramic-cooker temperatures while transferring heat fast enough for a crisp, leopard-spotted crust. The core trade-off is thermal conductivity versus thermal shock resistance: steel heats faster and sears better, while cordierite and ceramic stones heat slower but tolerate the Egg's direct lump-charcoal environment. Buy a stone sized to your Egg's plate setter and rated for 700°F+ if you want durability; skip thin, unrated discs that crack under the Egg's concentrated heat.
At a glance
- Price range
- Price range not synced yet
- Category
- Pizza Stones & Steels
- Data updated
- Nov 20, 2026
Current offers
Highlights
- Cordierite stones (typically 0.5-0.75 in thick) resist thermal shock up to ~1,200°F but conduct heat slowly, producing a softer bottom crust than steel.
- Carbon-steel baking steels (0.25-0.375 in) conduct heat roughly 20x faster than cordierite, preheat in 45-60 min at 500-550°F, and deliver crisp, blistered bottoms.
- Big Green Egg plate setters are ceramic heat deflectors sized by Egg model—MiniMax, Small, Medium, Large, XLarge—so stone diameter must match the deflector's flat cooking area.
- Stone diameter should be 1-2 in smaller than the plate setter or grid to allow airflow and avoid cracking from direct flame contact at the edges.
Best use cases
- Best fit: Large or XLarge Egg owners cooking Neapolitan-style at 600-700°F should pick a 14-16 in cordierite stone on the plate setter for even, crack-resistant heat.
- Best fit: New York-style and Detroit-style bakers wanting maximum bottom crispness should choose a 0.25 in carbon-steel plate sized to the Egg's grid, preheated 45+ min.
- Wrong fit: Do not use a thin 0.25 in unrated stone or a glass baking dish on the Egg's plate setter—concentrated lump-charcoal heat will crack or shatter it.
- Wrong fit: Skip oversized stones that touch the Egg's ceramic walls; edge contact with the hot ceramic causes thermal-shock fractures during high-heat cooks.
Buying tips
- Match stone diameter to your Egg model: MiniMax ~10 in, Small ~10-12 in, Medium ~12-13 in, Large ~14-15 in, XLarge ~16-18 in, keeping 1-2 in clearance from the ceramic wall.
- Choose cordierite rated to at least 700°F for high-heat Neapolitan bakes; lower-rated ceramic stones are prone to cracking under the Egg's concentrated lump-charcoal heat.
- For steel, pick 0.25-0.375 in carbon steel (not aluminum) and confirm it fits the Egg's stainless grid diameter without overhanging the plate setter.
- Preheat the stone or steel with the Egg for 30-45 min (steel 45-60 min) at target temp before launching pizza; a cold surface yields soggy bottoms and sticking.
Specs
| Stone Material | Cordierite vs carbon steel |
|---|---|
| Stone Thickness | 0.5-0.75 in (stone) / 0.25-0.375 in (steel) |
| Heat Rating | 700°F+ cordierite / steel 550°F+ |
| Egg Fit Sizes | 10-18 in by MiniMax to XLarge |
Related searches
What to check before buying
- Measure your Egg's plate setter flat diameter and stainless grid diameter; the stone must sit inside the plate setter's rim with 1-2 in clearance.
- Confirm your stone or steel is rated for at least 700°F (cordierite) or is 0.25 in+ carbon steel, since the Egg reaches 700-900°F for pizza.
- Check that you own a plate setter or heat deflector—cooking a stone directly over lump charcoal without deflection causes scorching and cracking.
- Verify the stone's thickness (0.5 in+ cordierite) and flatness; warped or thin stones rock on the grid and heat unevenly.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
