Photos from current listings. Actual item, color, and included accessories may vary.
Butet Close Contact Buying Guide
Butet Close Contact saddles are French-made jumping saddles built for precise leg contact over fences, defined by a flat seat, forward flap, and minimal bulk. The primary trade-off is between the brand's calibrated French-tree feel and the risk of buying a used saddle with unknown panel or tree condition. The decision rule: buy only with confirmed tree integrity, correct flap/seat sizing, and a trial period; skip any saddle with cracked panels or unverifiable serial history.
At a glance
- Brand
- Not synced yet
- Model
- Not synced yet
- MPN
- Not synced yet
- Category
- Equestrian Saddles & Pads
- Status
- Offers available
- Data updated
- Nov 16, 2026
Current offers
Highlights
- Butet close contact saddles use a laminated beechwood and steel French tree; tree width is fixed, so fit must match the horse's wither measurement.
- Seat sizes typically run 15.5" to 18", and flap lengths vary (short, regular, long) to match rider leg length and horse shoulder angle.
- Panels are wool-flocked and can be re-flocked; exposed seams or hard lumps indicate compressed wool needing service.
- Full-grain calfskin leather is standard; grained or corrected leather indicates a lower trim or aftermarket repair.
Best use cases
- Best fit: hunter/jumper riders needing direct leg contact over fences—choose a close contact with forward flap and flat seat.
- Wrong fit: dressage or trail riders needing deep seat security—skip close contact and choose a deeper-seated model.
- Best fit: riders with a confirmed horse fit from a saddle fitter—pair with a half pad only if the tree width matches.
- Wrong fit: growing riders or multiple riders sharing one saddle—skip fixed-tree close contact and choose an adjustable-tree model.
Buying tips
- Measure your horse's wither tracing and compare to the saddle's tree width; Butet fixed trees cannot be adjusted without a fitter.
- Seat size: match your typical dressage seat size minus 0.5" to 1" for close contact flat seats.
- Flap length: short flap for riders under 5'6" or long-legged horses; long flap for riders over 5'10".
- Inspect used saddles for panel symmetry, tree flex (no creaking), and stitching at the cantle—re-flocking costs are common.
Specs
| Tree Type | Fixed French beechwood/steel |
|---|---|
| Seat Depth | Flat close contact |
| Flap Options | Short / Regular / Long |
| Panel Material | Wool-flocked, re-flockable |
Alternatives to compare
Related searches
What to check before buying
- Confirm the horse's measured tree width and compare to the saddle's stamped width or serial.
- Measure your current saddle's seat and flap length to match the Butet sizing.
- Check the panel underside for hard spots, tears, or asymmetric flocking before purchase.
- Verify the saddle's serial number and model stamp; French-made Butet saddles carry a stamped serial on the flap.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.







