Trail Gear Advisor

686 Snowboard Pant Buying Guide

686 snowboard pants are technical, rider-owned outerwear built for park, street, and resort riding, where the decisive trade-off is waterproof/breathability rating versus mobility and insulation. Choose a 10K/10K uninsulated shell for all-around resort use; step up to 15K–20K 3-layer or GORE-TEX only for wet climates and deep touring; avoid sub-10K fashion shells for sustained wet snow.

Waterproofing Tier:10K/10K vs 15K-20K vs GORE-TEXConstruction:2-layer vs 3-layer shellInsulation:Uninsulated shell vs 40g syntheticFit Cut:Regular vs relaxed freestyle

At a glance

Price range
Price range not synced yet
Category
Skis & Snowboards
Data updated
Nov 16, 2026

Current offers

No verified match right now. Browse live listings:

Highlights

  • 686 splits its line into 2-layer shells (10K/10K, taped seams) and 3-layer/GORE-TEX tiers (20K+), with the latter adding stormproofing but lower stretch.
  • Insulation separates the line: uninsulated shell pants rely on base layers, while 686's infiLOFT synthetic fill (typically 40g) suits sub-freezing lift days without bulk.
  • Fit families differ: GLCR and standard fits run regular, while 686's 'Everyday' and 'Dojo' cuts favor a looser freestyle silhouette with articulated knees.
  • Waist and hem adjustability—Velcro side tabs, belt loops, and BOA-compatible gaiters—determines whether a pant layers over boots cleanly without drag.

Best use cases

  • Best fit: all-mountain resort riders in mixed conditions—pick a 10K/10K 2-layer shell with taped critical seams and a relaxed fit for layering.
  • Best fit: park and street riders wanting durability and mobility—choose 686's heavier-canvas or ripstop freestyle cuts with reinforced cuffs and uninsulated legs.
  • Wrong fit: wet Pacific Northwest or backcountry touring—skip 10K shells and select a 20K 3-layer or GORE-TEX tier with fully taped seams.
  • Wrong fit: deep-winter riders who run cold and dislike base layers—avoid uninsulated shells; choose an insulated 686 pant with synthetic fill.

Buying tips

  • Match waterproof rating to climate: 10K/10K handles dry cold resorts; 15K–20K or GORE-TEX is required for wet snow, rain-on-snow, and touring.
  • Use 686's size chart plus inseam: regular fits add 1–2 in for layering, while freestyle cuts run 2–3 in looser—size down if you want a trim silhouette.
  • Check seam construction: fully taped seams cost more but prevent wet-out; critically taped 2-layer pants are adequate for dry climates only.
  • Confirm boot compatibility: pant hem must clear a size 10–13 boot with a gaiter; articulated knees and a BOA or Velcro hem cinch prevent drag.

Specs

Waterproofing Tier10K/10K vs 15K-20K vs GORE-TEX
Construction2-layer vs 3-layer shell
InsulationUninsulated shell vs 40g synthetic
Fit CutRegular vs relaxed freestyle

Related searches

What to check before buying

  • Measure your waist and inseam against 686's size chart; allow 1–2 in for a base layer and midlayer under shell pants.
  • Verify your boot height and sole length—hem and gaiter must fit over the boot cuff without lifting the pant leg when flexed.
  • Match the waterproof rating to your snow: dry powder (10K) versus wet coastal snow (15K–20K or GORE-TEX).
  • Confirm insulation preference: uninsulated shell for layering versus infiLOFT synthetic fill for cold lift days.

FAQ

All Skis & Snowboards buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.