Trail Gear Advisor

Atomic Bent 100 Buying Guide

The Atomic Bent 100 is a freeride-oriented all-mountain ski built for progressive riders who want a playful, surfy feel without sacrificing edge grip on hardpack. The core trade-off is between the lightweight poplar-and-beech core with carbon stringers (lively and forgiving) and heavier metal-laminate skis (damp and stable at speed). Choose the Bent 100 if you prioritize maneuverability and soft-snow playfulness; skip it if you demand race-level edge hold or high-speed stability on firm groomers.

Waist Width:100 mmConstruction:Poplar/beech core + carbonRocker Profile:Tip/tail rocker, camber underfootTurn Radius:16-21 m by length

At a glance

Price range
Price range not synced yet
Category
Skis & Snowboards
Data updated
Nov 16, 2026

Current offers

No verified match right now. Browse live listings:

Highlights

  • 100 mm waist width sits in the all-mountain sweet spot, balancing float in powder with quick edge-to-edge transitions on groomers.
  • Poplar and beech wood core with carbon stringers keeps swing weight low for spins and butters while retaining camber underfoot for grip.
  • HRZN Tech tip and tail (10% rocker) adds surface area for soft-snow planing without lengthening the running surface.
  • Available in lengths from 164 cm to 192 cm, with turn radius scaling from roughly 16 m to 21 m to match rider height and style.

Best use cases

  • Best fit: Intermediate to advanced riders skiing 60/40 soft-snow to groomed runs in Western resorts—pick the Bent 100 for playful tree runs and side hits.
  • Wrong fit: Dedicated groomer carvers or ice-coast skiers who need metal-laminate dampness and race-level edge hold should choose a narrower, stiffer ski.
  • Best fit: Park and pipe riders who want a single ski for jumps, butters, and occasional powder days—choose the Bent 100 over the narrower Bent 90 for float.
  • Wrong fit: Beginners still mastering parallel turns should skip the Bent 100; its 100 mm waist and freeride rocker slow edge-to-edge initiation on beginner slopes.

Buying tips

  • Size by height: choose length at or just above your height for freeride float; go one size down (e.g., 172 cm for a 178 cm rider) for park-focused playfulness.
  • Match binding brake width to the 100 mm waist—select a 100-110 mm brake to avoid re-bending; narrower brakes will not fit.
  • Check mount point: the Bent 100 is designed for a progressive mount (roughly -2 to -4 cm from true center); confirm your boot sole length fits the recommended range.
  • Prefer the carbon-stringer construction for lighter riders (under 75 kg) seeking pop; heavier or aggressive skiers should consider a stiffer metal-laminate alternative for high-speed stability.

Specs

Waist Width100 mm
ConstructionPoplar/beech core + carbon
Rocker ProfileTip/tail rocker, camber underfoot
Turn Radius16-21 m by length

Related searches

What to check before buying

  • Measure your boot sole length (BSL) in millimeters—ensure the binding you pair can adjust to your BSL without exceeding its range.
  • Verify your local ski shop can mount and drill the ski; confirm the ski has not been previously mounted to avoid weak hole patterns.
  • Check your vehicle roof box or ski bag interior length—192 cm skis require at least 200 cm of internal storage.
  • Confirm your DIN setting with a certified tech based on height, weight, and ability; the Bent 100 accepts standard alpine bindings.

FAQ

All Skis & Snowboards buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.