Atomic Bent 110 Buying Guide
The Atomic Bent 110 is a freestyle-oriented all-mountain ski built around a lightweight poplar/beech core, a 110 mm waist, and a playful rocker profile. The core trade-off is between the surfy, easy-pivot feel of its HRZN tech tip/tail and the edge grip and stability you give up versus a heavier, more directional ski. Choose the Bent 110 if you prioritize soft-snow playfulness and switch skiing; skip it if you need a hard-snow carving or high-speed charging tool.
At a glance
- Price range
- Price range not synced yet
- Category
- Skis & Snowboards
- Data updated
- Nov 16, 2026
Current offers
Highlights
- 110 mm waist sits in the true all-mountain freestyle class, balancing float in powder with enough width for groomer access and park laps.
- HRZN Tech (10% tip/tail width increase) adds surface area for float without extra swing weight, but reduces effective edge on firm snow.
- Poplar/beech wood core with carbon stringers keeps the ski light and poppy; heavier directional skis use metal laminates for dampness and grip.
- Progressive rocker (rocker in tip/tail, camber underfoot) shortens effective edge and makes the ski pivot easily, at the cost of top-end carving stability.
Best use cases
- Best fit: advanced to expert freestyle skiers who ski 60%+ soft snow and want a playful, symmetrical-ish twin for spins, switch, and natural hits. Pair with a 100–120 flex park/all-mountain boot.
- Wrong fit: East Coast hardpack carvers or high-speed big-mountain chargers—the light core and rocker profile lack the dampness and edge hold of metal-laminate skis. Choose a 90–100 mm directional ski instead.
- Wrong fit: true beginners—the 110 mm waist and freestyle geometry demand strong edge control and powder experience. Start on an 80–90 mm all-mountain ski first.
Buying tips
- Match ski length to height and ability: freestyle riders typically go 5–10 cm shorter than directional skiers; a 180 cm Bent 110 suits a 175–185 cm advanced rider, while 170 cm suits lighter or park-focused skiers.
- Boot sole length and binding brake width: choose a brake width of 110–120 mm for the 110 mm waist; narrower brakes won't fit and wider brakes drag on hard snow.
- Check mount point: the Bent 110 uses a freestyle-recommended mount (often near center); directional skiers may prefer +2 cm forward for carving, but this reduces switch performance.
- Verify the model year: construction has remained consistent, but early generations used different topsheet/core layups; current models list HRZN Tech and poplar/beech core in specs.
Specs
| Waist Width | 110 mm (all-mountain freestyle) |
|---|---|
| Rocker Profile | Tip/tail rocker, camber underfoot |
| Core Material | Poplar/beech wood + carbon |
| Skill Level | Advanced to expert |
Related searches
What to check before buying
- Measure your boot sole length (BSL) in mm and confirm the binding is adjustable to that BSL range before mounting.
- Confirm your local shop can mount and adjust bindings to your boot; the Bent 110 requires a flat mount with proper screw depth for a wood core.
- Check that your ski bag or roof rack fits a 110 mm waist and the length you choose (typically 170–190 cm).
- Verify the ski's recommended mount point and whether you need a shop to drill for a freestyle or directional mount; pre-mounted skis must match your BSL.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
