Trail Gear Advisor

Burton Snow Pant Buying Guide

Burton snow pants are the benchmark for snowboard-specific outerwear, defined by their waterproof/breathability ratings, insulation strategy, and rider-driven fit systems. The primary trade-off is between 2-layer shell construction (lighter, more breathable, requires layering) and 2L/3L insulated builds (warmer, less versatile). The decision rule: match the waterproof rating and insulation to your typical conditions—10K/10K for resort groomers, 20K+ for wet backcountry—and always prioritize a fully taped seam and a built-in gaiter over brand-tier marketing.

Waterproof Rating:10K / 15K / 20K mmInsulation Type:Shell / 40g / 60gConstruction:2L vs 3L membraneSeam Sealing:Critical vs Fully taped

At a glance

Price range
Price range not synced yet
Category
Skis & Snowboards
Data updated
Nov 16, 2026

Current offers

No verified match right now. Browse live listings:

Highlights

  • Waterproof/breathability ratings (e.g., 10K/10K vs 20K/20K) determine resistance to wet snow and sweat buildup; 10K is resort-basic, 20K+ is backcountry-ready.
  • 2L vs 3L construction: 2L uses a bonded outer fabric plus separate lining (bulkier, cheaper), while 3L bonds membrane to outer and liner for lighter weight and better breathability.
  • Insulation tiers: shell (no insulation, layering required), 40g mapped insulation (low-bulk warmth), and 60g+ full insulation (cold-day comfort at cost of versatility).
  • Fit systems: Burton's articulated knees and built-in gaiter with lace hook prevent snow entry; relaxed vs slim fits change layering room and boot compatibility.

Best use cases

  • Resort riders on groomers in dry cold: pick a 10K/10K shell or 40g insulated pant with fully taped seams—skip 3L backcountry shells that cost more without added benefit.
  • Backcountry tourers and splitboarders: choose a 20K/20K 3L shell with minimal insulation and vent zips; avoid heavy insulated pants that trap heat on the skin track.
  • Park and rail riders: prioritize a relaxed fit with reinforced cuffs and a short inseam to avoid boot drag; skip bib pants that restrict torso rotation.
  • Wet Pacific Northwest or spring slush: select 20K waterproofing and critically seam-taped construction; a 10K pant will wet through in sustained rain or wet snow.

Buying tips

  • Match waterproof rating to climate: 10K for cold dry resorts, 15K–20K for wet snow or frequent storms, 20K+ for backcountry or wet climates.
  • Choose insulation by activity: shell (0g) for layering versatility, 40g for moderate cold, 60g+ for deep-winter resort days; insulated pants run warmer than same-rating shells.
  • Verify seam sealing: fully taped seams are mandatory for 15K+ ratings; critical taped seams are acceptable only for 10K resort pants.
  • Check fit math: Burton relaxed fit adds 2–4 inches over slim; size up if layering fleece or wearing knee pads, and confirm inseam clears boot cuff without dragging.

Specs

Waterproof Rating10K / 15K / 20K mm
Insulation TypeShell / 40g / 60g
Construction2L vs 3L membrane
Seam SealingCritical vs Fully taped

Related searches

What to check before buying

  • Measure your inseam and compare to Burton's size chart—pant inseam should end 1–2 inches above boot sole with boots on.
  • Confirm your boot height and cuff volume: pants with internal gaiters fit over most snowboard boots, but bulky boots may require relaxed-fit cuffs.
  • Check jacket-pant interface: Burton pants often use a snap-together interface with Burton jackets; if mixing brands, ensure a compatible powder skirt or bib.
  • Assess local climate: sustained wet snow or rain demands 20K+ waterproofing and fully taped seams; dry cold allows 10K with critical seams.

FAQ

All Skis & Snowboards buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.