Trail Gear Advisor

Photos from current listings. Actual item, color, and included accessories may vary.

Powell Peralta Rat Bones Buying Guide

Powell Peralta Rat Bones are re-issued old-school skateboard wheels built in the classic wide, rounded profile that defined 1980s pool and vert skating. The defining trade-off is durometer: softer 85A formulas grip concrete bowls and smooth rough asphalt, while harder 90A formulas roll faster and slide more predictably on smooth parks. Buy the 85A for grip and rough surfaces, the 90A for speed and controlled slides—skip both if you need a modern narrow street wheel.

Wheel Diameter:60mmDurometer:85A grip / 90A speedProfile:Wide rounded old-schoolBearing Seat:Standard 608
Typical price range$39.95

At a glance

Brand
Not synced yet
Model
Not synced yet
MPN
Not synced yet
Category
Skateboard Wheels & Bearings
Status
Offers available
Data updated
Nov 16, 2026

Current offers

Highlights

  • Classic wide, rounded old-school profile with a generous contact patch, designed for pool, vert, and cruiser stability rather than flip-trick agility.
  • Two durometer tiers: 85A for maximum grip on concrete and rough asphalt, 90A for faster roll speed and easier slide initiation on smooth surfaces.
  • 60mm diameter provides more roll speed and obstacle clearance than modern 52-54mm street wheels, at the cost of slower acceleration and more wheelbite risk.
  • Powell Peralta re-issue construction uses period-correct urethane formulas and graphics, with the same wide bearing seat and offset shape as the original 1980s Rat Bones.

Best use cases

  • Best fit: pool, bowl, and vert skating on concrete—choose the 85A for grip through tight transitions and coping, or the 90A for faster lines and controlled slides.
  • Best fit: old-school cruiser and filmer setups where a wide, stable wheel rolls over cracks and rough pavement—85A is the pick for bad asphalt.
  • Wrong fit: modern street skating and flip tricks—the 60mm width and rounded profile add weight and reduce flip clearance; choose a narrower 52-54mm street wheel instead.
  • Wrong fit: technical freestyle or slalom—the wide contact patch and 60mm diameter are too bulky; select a smaller, harder freestyle-specific wheel.

Buying tips

  • Match durometer to surface: 85A for grip on concrete bowls and rough asphalt, 90A for speed and slide control on smooth park concrete.
  • Confirm your truck and deck setup can clear 60mm wheels—add riser pads if you get wheelbite, since 60mm sits well above modern street sizing.
  • Check bearing seat compatibility: Rat Bones use standard 608 bearings, so any standard skate bearing fits; buy a set of 8 bearings for four wheels.
  • Buy a full set of four wheels—Rat Bones are sold as four-wheel sets, and mixing durometers front-to-back changes slide and grip balance.

Specs

Wheel Diameter60mm
Durometer85A grip / 90A speed
ProfileWide rounded old-school
Bearing SeatStandard 608

Alternatives to compare

Related searches

What to check before buying

  • Measure your deck width and truck axle width: Rat Bones suit wider old-school decks and trucks, not narrow modern street setups.
  • Check wheel clearance: 60mm wheels need sufficient deck-to-axle gap; add riser pads if your setup wheelbites with wheels above 56mm.
  • Confirm your riding surface: concrete bowls and rough asphalt favor 85A; smooth park concrete favors 90A for speed and slides.
  • Verify you have standard 608 bearings and the correct bearing spacers for the wheel's bearing seat before mounting.

FAQ

All Skateboard Wheels & Bearings buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.