Photos from current listings. Actual item, color, and included accessories may vary.
Ricta Chrome Clouds 92A Buying Guide
Ricta Chrome Clouds 92A are cruiser-focused skateboard wheels that use a 92A urethane formula to soften impact while retaining enough hardness for street tricks. The key trade-off is grip and rollover comfort versus speed and slide predictability: 92A sits between soft cruiser wheels (78-87A) and hard park wheels (99-101A). Choose these if you want a durable, impact-absorbing wheel for rough pavement and occasional tricks; skip them if you need maximum speed on smooth concrete or easy sliding.
At a glance
- Brand
- Not synced yet
- Model
- Not synced yet
- MPN
- Not synced yet
- Category
- Skateboard Wheels & Bearings
- Status
- Offers available
- Data updated
- Nov 16, 2026
Current offers
Highlights
- 92A durometer is a medium-soft urethane that balances grip on rough asphalt with enough rebound for ollies and curb drops.
- Chrome Clouds use a wider contact patch and rounded edge geometry to smooth out cracks and pebbles better than narrow street wheels.
- Ricta's urethane formula is poured for consistent rebound, reducing flat spots during repeated sliding or power-slides on abrasive surfaces.
- 56mm diameter gives more roll speed and obstacle clearance than 52-54mm street wheels, but may cause wheelbite on loose trucks.
Best use cases
- Best fit: riding rough neighborhood streets, bike paths, and cracked sidewalks on a cruiser or hybrid setup—pick 56mm for rollover and pair with riser pads if needed.
- Best fit: skatepark transition and mild street tricks where you want softer landings without losing trick response—choose 92A over 78A for less bounce and more control.
- Wrong fit: smooth indoor skateparks or technical ledge skating—skip 92A and choose 99-101A hard wheels for speed and predictable slides.
- Wrong fit: downhill or power-sliding at speed—skip these and choose a dedicated slide wheel with a stone-ground contact patch and higher durometer.
Buying tips
- Match wheel width to truck axle: 56mm Chrome Clouds suit 8.0-8.5" decks; on narrower trucks they may overhang and cause wheelbite.
- Use the 92A rating as a threshold: below 90A is cruiser-soft, 92-95A is hybrid, above 97A is park-hard—choose 92A for mixed rough terrain and tricks.
- Check bearing seat: Ricta wheels use standard 608 bearings; install with a bearing press to avoid misalignment that causes wobble.
- If upgrading from 52-54mm street wheels, add 1/8" riser pads to maintain truck geometry and prevent wheelbite on 56mm diameter.
Specs
| Durometer | 92A medium-soft hybrid |
|---|---|
| Diameter | 56mm |
| Bearing Seat | Standard 608 (8mm axle) |
| Best Surface | Rough asphalt / cracked concrete |
Alternatives to compare
Related searches
What to check before buying
- Measure deck width and truck axle width: 56mm wheels need at least an 8.0" deck and trucks that match axle width to avoid overhang.
- Check truck height and existing riser pads: 56mm wheels on standard-height trucks often require 1/8" risers to prevent wheelbite.
- Confirm bearing size: standard 608 bearings (22mm outer diameter) fit Ricta Chrome Clouds; have a press or shop install them straight.
- Assess riding surface: 92A excels on rough asphalt and cracked concrete; for smooth park concrete, step up to 99A+ for speed.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.







