Choosing ski & snowboard bindings and boots becomes difficult when one choice is a full ski binding and the other is a small snowboard hardware fix. The right pick depends less on which sounds more substantial and more on whether you are outfitting skis or updating a snowboard mounting setup. Here is the short answer: Marker Griffon 13 is the equipment choice for skis; Generic Snowboard Binding Screws are the targeted choice for snowboard mounting hardware.
Quick verdict
Choose Marker Griffon 13 Ski Bindings when you need a ski-binding system with dedicated toe and heel components, plus support for Touring, GripWalk, and Alpine boots. Choose Generic Snowboard Binding Screws when the job is securing a snowboard binding with the listed mounting hardware. The listed-price spread is $198.00, but this is not a like-for-like price comparison: one is a ski binding and the other is a screw set.
At-a-glance comparison
| Product | Listed price | Role | Key listed details | Better match for |
|---|---|---|---|---|
| Marker Griffon 13 Ski Bindings | USD 209.99 | Ski bindings | DIN 4.0-13.0; Triple Pivot Elite 3 Toe System; Inter Pivot 3 Freeride Heel | Ski equipment setup |
| Snowboard Binding Screws | USD 11.99 | Snowboard mounting hardware | 12 pieces; M6x16 and M6x13; 3D, 4x4, and The Channel systems | Snowboard binding hardware |
Where each product wins
- Marker Griffon 13 wins for ski-focused equipment needs. Its title identifies it as a ski binding, while the toe and heel systems make it the relevant choice when the binding itself is the item being selected.
- Snowboard Binding Screws win for a targeted snowboard hardware update. The set covers the 3D, 4x4, and The Channel mounting systems named for the screws, making it more appropriate when the binding is already in place and the hardware is the concern.
Product notes
Marker Griffon 13 Ski Bindings
The Marker Griffon 13 is the direct match when the job is equipping skis rather than servicing snowboard mounting hardware. Its listed DIN range is 4.0-13.0, and it includes the Triple Pivot Elite 3 Toe System and Inter Pivot 3 Freeride Heel. Multinorm technology is specified for Touring, GripWalk, and Alpine boots, while the Anti Ice Rail addresses snow and ice on boot soles. Those details give skiers a concrete reason to choose it when boot-system support and a complete ski-binding setup matter. The limitation is equally clear: it is aimed at younger and lighter advanced to expert skiers, not a small hardware fix. If the immediate need is snowboard binding screws, its toe, heel, and boot-interface features are more equipment than the repair calls for.
Snowboard Binding Screws
Snowboard Binding Screws make sense when an existing snowboard setup needs mounting hardware. The set contains eight silver M6x16 screws for 3D and 4x4 mounts, plus four black M6x13 screws for The Channel system. That gives it a concrete reason to choose the set for a snowboarder whose mounting pattern matches one of those named systems. Stainless-steel construction, Phillips heads, and the Easy Installation wording in the product name further define its intended use. Its limitation is scope: this is a 12-piece hardware set, not a ski binding with a DIN range, toe system, heel system, or boot interface. It cannot answer a ski-binding replacement need, and the two screw lengths require matching the hardware to the mounting system.
Final choice by use case
- Choose Marker Griffon 13 for a ski-binding purchase, especially when the listed boot support for Touring, GripWalk, or Alpine boots fits your setup.
- Choose Snowboard Binding Screws for a snowboard binding hardware update involving the listed 3D, 4x4, or The Channel patterns.
- If you are shopping for both skis and a snowboard, treat them as separate roles rather than substitutes: the Marker handles ski-binding equipment, while the screw set addresses snowboard mounting hardware.