Mecate Rein Slobber Strap Buying Guide
A mecate rein slobber strap is the short, heavy leather or rope connector that links a bosal or bit to a mecate rein, absorbing shock and protecting the headstall from abrasion. The core trade-off is hardware-grade leather thickness and hand-braided rope quality versus cheap single-ply straps that stretch and crack within a season. Buy a strap of at least 8–10 oz skirting leather (or a tightly braided 5/16-inch rope) with solid copper or brass rings, and skip paper-thin split-leather or stapled hardware entirely.
At a glance
- Price range
- Price range not synced yet
- Category
- Bridles, Bits & Reins
- Data updated
- Nov 16, 2026
Current offers
Highlights
- Slobber straps are classically cut from 8–12 oz vegetable-tanned skirting leather; anything under 6 oz stretches and tears at the ring hole under a 10–12 ft mecate load.
- Hardware must be solid copper, brass, or stainless steel rings or Conway buckles; plated or stapled rings are the #1 failure point on budget straps.
- Rope mecate slobber straps use 5/16-inch (8 mm) double-braid or hand-braided polyester/nylon, which resists rot better than rawhide but offers less traditional feel.
- Strap length typically runs 9–12 inches folded; longer straps suit bosal hackamore setups, shorter straps suit bit-and-bridle transitions.
Best use cases
- Best fit: bosal hackamore training — choose 10–12 inch heavy skirting-leather straps with copper rings so the mecate hangs clear of the horse's chin.
- Best fit: bit-to-mecate transition — pick 9–10 inch straps with a Conway buckle so the mecate can be swapped to a bridle without untying the rein knot.
- Wrong fit: daily arena work on a finished bridle horse — skip rope slobber straps (they lack the weighted feel and traditional look) and use leather with brass rings.
- Wrong fit: wet, muddy turnout or trail string — avoid untreated rawhide or single-ply leather; choose braided polyester rope or oiled 10 oz leather that resists water damage.
Buying tips
- Match strap weight to mecate diameter: a 5/16-inch mecate needs a ring opening of at least 1.5 inches; a 3/8-inch mecate needs 1.75 inches or the rein binds.
- Choose vegetable-tanned skirting leather over chrome-tanned split leather — veg-tan accepts neatsfoot oil, molds to the ring, and lasts years longer.
- Stitching must be saddle-stitched with heavy waxed thread (at least 3 stitches per inch); glued-and-riveted straps pull apart at the ring under load.
- For bosal setups, buy straps with a wider top fold (2.5–3 inches) to spread pressure; for bit setups, a narrower 2-inch fold keeps the headstall clean.
Specs
| Strap Material | 8–12 oz veg-tan leather / braided rope |
|---|---|
| Ring Hardware | Solid copper, brass, or stainless |
| Strap Length | 9–12 in folded |
| Mecate Fit | 5/16 in or 3/8 in diameter |
Related searches
What to check before buying
- Measure your bosal or bit ring diameter before ordering: bosal rings typically 3/4–1 inch, bit rings 2.5–3 inches; strap rings must clear the mecate knot.
- Confirm your mecate length and diameter (commonly 10 ft × 5/16 in or 12 ft × 3/8 in) so the slobber strap ring opening matches the rein.
- Check climate: humid or wet climates call for braided rope or heavily oiled leather; dry climates favor waxed leather to prevent cracking.
- Verify you have the companion parts — a mecate rein and either a bosal or bridle headstall — because slobber straps are sold as connectors, not complete rein sets.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
