Trail Gear Advisor

Side Rein Buying Guide

Side reins are training aids that connect the bit rings to the girth or surcingle, giving a lunging horse a consistent elastic or leather contact that encourages balance and correct head carriage. The core trade-off is between fixed leather, which teaches a horse to accept an unyielding rein, and elastic or rubber inserts, which absorb bounce but can teach a horse to lean against the hand if too soft. Choose fixed leather for experienced, balanced horses and elastic for green or tense horses that need forgiveness in the contact.

Rein Material:Leather / Elastic / CordAdjustment Range:24-48 in (pony-cob-full)Bit-End Hardware:Trigger snap / Billet hookElastic Width:1-2 in (6-12 in stretch)

At a glance

Price range
Price range not synced yet
Category
Bridles, Bits & Reins
Data updated
Nov 16, 2026

Current offers

No verified match right now. Browse live listings:

Highlights

  • Material construction splits into three tiers: flat leather (most durable, least give), braided cotton or nylon cord (lightest, breaks under extreme load for safety), and elastic or rubber-insert reins (most forgiving, shortest lifespan).
  • Attachment hardware must be trigger snaps or billet hooks at both ends; a fixed buckle at the bit end prevents quick length changes, while a snap at the girth end allows on-off without unbuckling the girth.
  • Elastic side reins are typically 1-2 inches wide with a 6-12 inch elastic section; wider elastic distributes pressure over a larger area of the bit ring and reduces pinching.
  • Adjustable length ranges from roughly 24 to 48 inches, with buckle or billet adjustment in 1-2 inch increments; fixed-length leather reins are sold in pony, cob, and full sizes.

Best use cases

  • Best fit: lunging a green or tense horse that inverts and braces — choose elastic reins with a 6-8 inch elastic insert and trigger snaps at both ends for quick adjustment.
  • Best fit: lunging an experienced dressage horse that holds a steady frame — choose flat leather reins with billet hooks and a fixed length matched to the horse's neck length.
  • Wrong fit: using side reins as a shortcut to force a headset on a horse that lacks forward balance — fixed leather at short lengths teaches evasions and can cause rearing; use a chambon or training fork only under supervision instead.
  • Skip: elastic reins wider than 2 inches or with more than 12 inches of stretch for strong horses — the excess give lets the horse lean and pull the reins taut without releasing.

Buying tips

  • Measure from the bit ring to the girth attachment point with the horse standing square: pony 24-30 inches, cob 30-36 inches, full 36-42 inches; buy reins that adjust at least 4 inches shorter and longer than that measurement.
  • Choose leather thickness of at least 2.5-3 mm for durability; thinner leather stretches and cracks at the buckle holes within a season of regular lunging.
  • Elastic reins should have the elastic stitched into a leather or webbing sleeve, not exposed; exposed elastic perishes from sweat and UV and fails at the stitch line.
  • Snap hooks should be solid brass or stainless steel with a spring-loaded gate; cheap nickel-plated snaps bend open under load and can detach from the bit ring mid-session.

Specs

Rein MaterialLeather / Elastic / Cord
Adjustment Range24-48 in (pony-cob-full)
Bit-End HardwareTrigger snap / Billet hook
Elastic Width1-2 in (6-12 in stretch)

Related searches

What to check before buying

  • Confirm your surcingle or girth has D-rings or a roller buckle at the girth line to attach the side reins; lunging without a surcingle requires a saddle with girth D-rings.
  • Measure your horse's bit ring diameter: side rein snaps need a 2.5-3 inch opening to fit over standard 2.5-3 inch loose-ring snaffle rings; smaller rings require smaller snaps.
  • Check that the reins adjust short enough for your horse's neck length and long enough to allow a stretched frame at walk; a 12-inch adjustment range covers most horses.
  • Inspect the stitching at every load point — bit-end buckle, girth-end snap, and elastic insert — for double stitching and barred tack; single-stitched seams are the first failure point.

FAQ

All Bridles, Bits & Reins buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.