Jon Boat Outrigger Buying Guide
Jon boat outriggers are stability add-ons that widen a narrow, low-freeboard aluminum hull to prevent capsize when standing to cast, tiller-steering, or running a trolling motor. The core trade-off is between fixed PVC/foam floats (cheap, light, but flex and degrade in UV) and aluminum pontoon outriggers with adjustable arms (heavier, costlier, but rigid and corrosion-resistant). Choose based on hull width, crew weight, and whether you stand to fish — if you only sit and fish calm water, a single foam outrigger per side suffices; if you stand, carry two adults, or face chop, specify a dual-pontoon aluminum system rated for your beam.
At a glance
- Price range
- Price range not synced yet
- Category
- Human-Powered Water Sports
- Data updated
- Nov 18, 2026
Current offers
Highlights
- Float material: UV-stabilized blow-molded HDPE or welded 5052 aluminum pontoons outlast PVC pipe or foam noodles, which crack and lose buoyancy within 1-2 seasons.
- Mounting architecture: clamp-on gunnel brackets fit 1-1.5 in rails without drilling; through-bolt deck plates are stronger but require 1/4-20 stainless fasteners and sealant.
- Arm adjustment: telescoping aluminum arms with quick-pin detents let you set float height and outboard reach; fixed-length arms limit you to one hull width.
- Buoyancy rating: each pontoon should displace at least 30-50 lb (roughly 0.5-0.75 cu ft of closed-cell foam or sealed air chamber) to offset a standing angler's lean.
Best use cases
- Best fit: 10-14 ft aluminum jon boat used for standing fly-casting or bowfishing — pick dual aluminum pontoon outriggers with 4-6 ft adjustable arms and clamp brackets.
- Best fit: solo angler in a 12 ft hull on sheltered lakes — a single foam-filled pontoon per side (bolt-on) adds low-speed stability without excess weight.
- Wrong fit: inflatable or fiberglass hulls with rounded gunnels — clamp brackets won't seat; use strap-on canoe-style floats instead.
- Skip: PVC-pipe DIY outriggers if you store the boat outdoors in high-UV climates; they become brittle and fail at joints within two summers.
Buying tips
- Match arm length to beam: for a 36-48 in beam jon boat, choose outriggers that extend 36-48 in per side to gain 6-8 ft total width; shorter arms give negligible righting moment.
- Specify stainless hardware (304 or 316) for all bolts, pins, and brackets; zinc-plated fasteners rust through in brackish water within a season.
- Check float displacement: sealed aluminum pontoons of 4 in diameter x 36 in length displace roughly 30 lb each; foam-filled HDPE of the same size is comparable but heavier.
- Verify bracket jaw capacity: most clamp mounts accept 1-1/8 to 1-1/2 in square or round gunnel rails; measure your rail thickness before ordering.
Specs
| Float Material | Sealed aluminum / HDPE foam / PVC |
|---|---|
| Mount Type | Clamp-on gunnel / bolt-on plate |
| Arm Reach | 36-48 in per side (adjustable) |
| Buoyancy Per Side | 30-60 lb (0.5-1.0 cu ft) |
Related searches
What to check before buying
- Measure your jon boat's beam at the stern and the gunnel rail width (square or round, thickness) — outrigger brackets must clamp or bolt to that exact profile.
- Confirm hull material and core: riveted aluminum takes bolt-on plates well; foam-filled or plastic hulls need wide backing plates to spread load.
- Check your storage and launch method: add-on outriggers typically add 10-20 lb per side and 3-4 ft of width — ensure your trailer or roof rack accommodates the wider footprint or that arms detach quickly.
- Verify water type: salt/brackish use demands 316 stainless and anodized aluminum; freshwater only can use 304 stainless and powder-coated steel brackets.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 18, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
