Trail Gear Advisor

Australian Stock Saddle Pad Buying Guide

An Australian stock saddle pad is a shaped, high-withers-cut numnah engineered to sit under a stock saddle's panel and clear its tall gullet and forward-cut skirts. The core trade-off is between wool-felt or high-density foam that resists compression under a heavy stock saddle and cheap open-cell foam that packs out and rubs within a season. Buyers should choose a pad with a measured wither channel and a contoured spine, not a flat square pad folded to fit.

Pad Construction:Wool felt vs high-density foamThickness Range:10-15 mm foam / 20-30 mm feltWither Channel:4-6 cm wide contoured spineTop Line Cut:Forward-cut stock vs flat square

At a glance

Price range
Price range not synced yet
Category
Equestrian Saddles & Pads
Data updated
Nov 20, 2026

Current offers

No verified match right now. Browse live listings:

Highlights

  • Stock saddles need a pad with a deep wither cutout; a flat dressage or square pad bridges the gullet and concentrates pressure on the spine.
  • Wool felt at 20-30 mm thickness holds loft under a heavy stock saddle; open-cell foam over 15 mm compresses permanently and creates pressure points.
  • Contoured spine channels of 2-3 fingers (roughly 4-6 cm) clear the stock saddle's high gullet without lifting the panel off the back.
  • Quilted cotton or wool-blend tops wick sweat; synthetic fleece liners pill and mat under the saddle's leather panel and skirt.

Best use cases

  • Pick a contoured wool-felt pad for daily stock work and long rides where the saddle stays on for hours and sweat management matters.
  • Pick a high-density foam or foam-and-felt pad for a close-contact stock saddle that already fits well and needs minimal bulk.
  • Skip square dressage pads and flat folded blankets; they bridge the stock saddle's gullet and cannot follow its forward-cut skirt line.
  • Skip thick synthetic fleece pads on a wide stock saddle; the added bulk tightens the gullet and restricts the shoulder.

Buying tips

  • Match pad length to the stock saddle's panel: pads roughly 2-5 cm longer than the panel at front and rear avoid rolled edges under the skirt.
  • Choose a wither channel at least 4 cm wide at the front; measure the saddle's gullet width at the pommel and add 1-2 cm clearance.
  • Wool felt at 20-30 mm suits heavy stock saddles; stay at 10-15 mm foam for a well-fitted saddle to preserve close contact and feel.
  • Confirm the pad's top line is cut forward for a stock saddle's horn and forward skirt; a straight dressage top line pulls the pad back under the cantle.

Specs

Pad ConstructionWool felt vs high-density foam
Thickness Range10-15 mm foam / 20-30 mm felt
Wither Channel4-6 cm wide contoured spine
Top Line CutForward-cut stock vs flat square

Related searches

What to check before buying

  • Measure the stock saddle's panel length front to back and its gullet width at the pommel before selecting pad length and wither channel.
  • Check the pad's spine contour matches the saddle's panel curve; a flat spine bridges and concentrates pressure along the withers.
  • Confirm the pad's top fabric is smooth under the panel and the bottom liner is non-pilling wool or felt against the horse's back.
  • Match pad thickness to the saddle fit: thick felt for a saddle that needs cushioning, thin foam for a close-contact fit that must not be altered.

FAQ

All Equestrian Saddles & Pads buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.