Cashel Swayback Pad Buying Guide
The Cashel Swayback Pad is a corrective western saddle pad engineered with a built-up central channel and shim pockets to fill the depression behind a horse's withers caused by age, conformation, or muscle atrophy. The core trade-off is between off-the-shelf foam builds and custom shimming: generic pads may not match your horse's sway severity, while modular shim systems let you tune the lift. Buy a pad with removable shims and a moisture-wicking top if your horse has a pronounced dip; skip fixed-foam pads if you need to adjust fit as the back changes.
At a glance
- Price range
- Price range not synced yet
- Category
- Equestrian Saddles & Pads
- Data updated
- Nov 20, 2026
Current offers
Highlights
- Cashel swayback pads use a high-density closed-cell foam insert shaped with a raised center to fill the dip behind the withers, not just a cutback gullet.
- Most models include top-loading shim pockets that accept 1/2-inch or 1-inch felt or foam shims, allowing lift adjustment without replacing the pad.
- The contoured spine channel must clear the withers by at least 2 inches when the saddle is cinched; pads with a flat spine will bridge and concentrate pressure.
- Top materials range from fleece or wool felt (breathable, high friction) to quilted nylon or neoprene (durable, easier to clean but warmer).
Best use cases
- Best fit: older horses or high-wither Thoroughbreds with a visible dip behind the shoulder—choose a shim-ready swayback pad and start with 1/2-inch shims, adding only as needed.
- Best fit: horses in rehab from back injury or poor saddle fit—pick a pad with removable shims so you can reduce lift as muscle returns.
- Wrong fit: horses with a flat or mutton wither and no dip—a swayback pad will add pressure at the loin; use a standard contoured pad instead.
- Wrong fit: round-barrel horses with no wither definition—shimmed swayback pads can roll; select a non-slip contoured pad without extra lift.
Buying tips
- Measure the dip: place a straight edge across the withers and measure the gap at the deepest point; choose shim thickness equal to that gap minus 1/4 inch to avoid over-lifting.
- Check the spine channel width: it must be at least 2 inches wider than your saddle's gullet at the front to prevent bridging on the withers.
- Match pad length to saddle: a pad should extend 1–2 inches beyond the saddle skirt front and back; oversized pads bunch and create pressure points.
- Prefer pads with separate left/right shim pockets over a single central shim—asymmetrical shimming corrects lateral lean and uneven muscle development.
Specs
| Lift Mechanism | Built-up foam vs removable shims |
|---|---|
| Shim Pocket | Top-loading, left/right independent |
| Spine Channel | 2+ in clearance at withers |
| Top Material | Fleece, felt, quilted nylon |
Related searches
What to check before buying
- Measure your horse's wither dip with a straight edge and record the gap depth in inches before selecting shim thickness.
- Confirm your saddle's gullet width and skirt length; the pad's spine channel and overall length must clear both.
- Check your horse's back shape for lateral asymmetry—if one side is lower, ensure the pad accepts independent left/right shims.
- Verify the pad's top material suits your climate: felt or fleece for cool, dry conditions; quilted synthetic for humid, high-sweat use.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
