Hulkfit Power Cage Buying Guide
The Hulkfit Power Cage is a budget-tier steel squat rack family sold in two distinct architectures: a 1,000 lb-rated 14-gauge 2x2-inch tube cage and a heavier 1,500 lb-rated 11-gauge 3x3-inch tube cage. The core trade-off is tube wall thickness and upright dimensions: thinner 14-gauge 2x2 steel flexes and limits add-on compatibility, while 11-gauge 3x3 steel accepts standard power-rack attachments and holds heavy loaded bar drops. Buy the 11-gauge 3x3 model if you squat or rack-pull near or above bodyweight plus plates; choose the 14-gauge 2x2 only for light-to-moderate home use with no expectation of standard 3x3 attachment cross-compatibility.
At a glance
- Price range
- Price range not synced yet
- Category
- Power Racks, Benches & Platforms
- Data updated
- Nov 18, 2026
Current offers
Highlights
- Two frame tiers exist: 14-gauge 2x2-inch uprights rated 1,000 lb vs 11-gauge 3x3-inch uprights rated 1,500 lb; the 3x3 accepts standard 1-inch-hole power rack attachments.
- Hole spacing is 1-inch through the bench-press and squat zones on the 3x3 cage, versus wider 2-inch spacing on the 2x2 cage, which limits fine J-cup and safety-arm height adjustment.
- The 14-gauge 2x2 cage uses 1-inch hardware and thinner J-cups; the 11-gauge 3x3 uses 5/8-inch or 1-inch pins depending on revision, so attachment purchases must match the upright hole diameter.
- Both cages ship as bolt-together flat-pack steel with a pull-up bar and dual landmine-compatible lower crossmembers; stability depends on bolting to a floor or adding a front stabilizer foot.
Best use cases
- Best fit: a lifter squatting up to roughly 1.5x bodyweight who wants a 3x3 11-gauge cage for standard attachments — buy the 1,500 lb-rated 3x3 model.
- Best fit: a beginner or lighter lifter doing bench, overhead press, and light squats in a low-ceiling garage — the 14-gauge 2x2 1,000 lb cage is adequate and cheaper.
- Wrong fit: a competitive powerlifter planning heavy rack pulls or banded squats on a 14-gauge 2x2 frame — skip the 2x2 cage and go 3x3 11-gauge or a dedicated competition rack.
- Wrong fit: anyone planning to add standard 3x3 power-rack attachments (monolift, strap safeties, lat pulldown) — skip the 2x2 cage because its 2x2 uprights and hole spacing will not mount them.
Buying tips
- Measure your ceiling: the 3x3 cage stands about 90-92 inches tall and the 2x2 about 80-84 inches; you need at least 6 inches of clearance above the pull-up bar for your head.
- Match attachment hole diameter before buying: 3x3 cages typically use 1-inch holes with 5/8-inch pins, so confirm your J-cups, safeties, and landmine sleeve match that pin size.
- Check the rated capacity against your real working load: add bar weight plus plates plus your bodyweight for rack pulls, and keep total under 1,000 lb for the 2x2 or 1,500 lb for the 3x3.
- Plan floor anchoring: bolt the cage to a plywood platform or concrete with the included floor brackets; an unbolted cage will walk during heavy squats even with the pull-up bar loaded.
Specs
| Upright Tube | 2x2 in (14-ga) vs 3x3 in (11-ga) |
|---|---|
| Weight Rating | 1,000 lb vs 1,500 lb |
| Hole Spacing | 2 in (2x2) vs 1 in (3x3) |
| Attachment Pin | 1 in holes / 5-8 in pins (3x3) |
Related searches
What to check before buying
- Ceiling height at least 96 inches for the 3x3 cage and 90 inches for the 2x2 cage, measured to the lowest obstruction.
- Floor space at least 48 inches wide by 48 inches deep for the cage footprint plus 24 inches of load/unload clearance on each side.
- Barbell compatibility: a standard 7-foot Olympic bar (28-29 mm shaft) fits both cages; a 6-foot bar may not reach both J-cups safely.
- Companion parts: Olympic plates, a bench that fits inside the cage (under 45 inches long), and floor anchors or a platform.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 18, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
