Professional Choice Saddle Pad Buying Guide
Professional Choice saddle pads are Western and English performance pads built around shock-absorbing felt or closed-cell foam cores with reinforced wear leathers. The core trade-off is between thick, high-density felt for impact protection and thinner, contoured foam for close contact and heat dissipation. Choose a pad whose spine and skirt dimensions match your saddle's bars and skirt length; pads that are too narrow or too long create pressure points and bridging.
At a glance
- Price range
- Price range not synced yet
- Category
- Equestrian Saddles & Pads
- Data updated
- Nov 18, 2026
Current offers
Highlights
- Western pads use 1-inch or 3/4-inch pressed felt or closed-cell foam cores; felt above 1 inch adds protection but reduces close contact and can stiffen under the skirt.
- English pads rely on high-density foam or gel inserts with a quilted cotton or synthetic top; thickness under 3/4 inch preserves leg feel and saddle fit.
- Wear leathers at the cantle, pommel, and skirt corners determine lifespan—reinforced leather or synthetic suede outlasts exposed fleece or bare felt edges.
- Contoured spine relief and cutback wither profiles prevent pressure on the withers; flat rectangular pads suit round-barrel horses but bridge on high-withered builds.
Best use cases
- Best fit: high-withered or narrow-barrel horses—pick a contoured pad with cutback wither relief and a 1-inch felt core to clear the spine; skip flat rectangular pads that bridge.
- Best fit: daily training or trail riding—choose a 3/4-inch felt or foam pad with reinforced wear leathers; skip thick 1-inch pads for close-contact disciplines like reining or cutting.
- Best fit: English close-contact or jumping—use a quilted cotton pad with a 1/2-inch foam or gel insert; skip Western felt pads that alter saddle fit and reduce leg feel.
- Wrong fit: round-barrel horses with flat pads—select a round-skirt or contoured pad that follows the barrel; flat pads slide and concentrate pressure at the skirt edges.
Buying tips
- Measure your saddle's skirt length and bar spread: Western pads run 30x30, 32x32, or 34x34 inches; a pad more than 2 inches longer than the skirt can rub the hip.
- Match pad thickness to saddle fit: add no more than 1/2 inch of pad under a well-fitting saddle; use 3/4 to 1 inch only to compensate for a slightly wide tree.
- Check the spine channel width: a channel under 2 inches pinches the withers; 2.5 to 3 inches clears most Western trees, while English pads need a 1.5-inch channel.
- Prefer pressed felt over needle-punched felt for durability—pressed felt at 1 inch or 3/4 inch resists compression better, while loose needle felt mats and loses loft.
Specs
| Core Material | Pressed felt vs closed-cell foam vs gel |
|---|---|
| Pad Thickness | 1/2 in (English) to 3/4-1 in (Western) |
| Wither Profile | Flat vs contoured cutback spine |
| Wear Leathers | Reinforced leather vs exposed fleece |
Related searches
What to check before buying
- Measure your saddle's skirt length and bar width before ordering; pad dimensions must stay within 2 inches of the skirt to avoid hip rub.
- Confirm your horse's wither profile: high, narrow withers need a cutback or contoured spine; mutton withers need a round skirt and wider channel.
- Check the pad's top material against your saddle's underside—smooth leather linings pair with felt; fleece or synthetic fleece linings pair with smooth leather to prevent slipping.
- Verify the pad's cleaning requirements: felt cores spot-clean only and shrink in machine wash; quilted cotton pads are machine-washable but lose shape with heat drying.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 18, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
