Trail Gear Advisor

Skate Wheel And Bearing Buying Guide

Skateboard wheels and bearings are the contact-point system that converts your push into speed and your landing into control—wheel diameter, urethane durometer, and bearing ABEC rating dictate ride feel, durability, and roll speed. The core trade-off is soft, grippy urethane for rough pavement versus hard, slide-friendly compounds for smooth parks, paired with bearing precision versus impact resistance. The decision rule: match durometer and diameter to your terrain first, then pick bearings by shield type and ABEC tier—never overspend on high-ABEC bearings for street use where impact kills them first.

Wheel Durometer:78A soft – 101A hardWheel Diameter:50mm street – 60mm+ cruiserBearing Size:608: 8x22x7mm standardBearing Shield:Metal ZZ / Rubber 2RS / Open

At a glance

Price range
Price range not synced yet
Category
Skateboard Wheels & Bearings
Data updated
Nov 16, 2026

Current offers

No verified match right now. Browse live listings:

Highlights

  • Urethane durometer scale: 78A–87A soft/grippy for rough streets, 88A–95A medium for mixed terrain, 96A–101A hard for smooth parks and technical slides.
  • Wheel diameter tiers: 50–53mm for street flip tricks, 54–56mm for park/all-terrain, 57–60mm+ for cruiser and longboard roll-over.
  • Bearing ABEC 1–9 rates precision tolerance only; skate-rated bearings add impact-resistant steel races and nylon ball retainers for landing shock.
  • Shield types: metal shields (ZZ) resist dirt best for street; rubber-sealed (2RS) hold grease for wet/sandy use; open bearings roll fastest but need constant cleaning.

Best use cases

  • Street and technical flip tricks: pick 51–53mm, 99A–101A wheels with ABEC 5–7 bearings—soft cruiser wheels absorb pop energy and high-ABEC bearings shatter on stair impacts.
  • Rough pavement commuting and cruiser: pick 56–60mm, 78A–85A wheels with rubber-sealed ABEC 3–5 bearings for roll-over and debris resistance; skip hard park wheels that chatter and stall.
  • Skatepark bowls and transition: pick 54–56mm, 95A–99A wheels with metal-shielded ABEC 7 bearings—wide contact patch and hard compound hold speed without wall-slip.

Buying tips

  • Match wheel width to truck axle: standard 8.0–8.5in trucks take 52–54mm contact patches; wider 149mm+ trucks need 55mm+ wheels to avoid wheelbite on turns.
  • Durometer is not linear across brands—a Bones 99A and an OJ 99A differ in rebound; use the numeric A-scale as a starting range, then adjust by terrain feel.
  • For bearings, ABEC 7+ only pays off on smooth concrete; for street and impact, choose skate-specific bearings with steel races over generic ABEC 9 industrial bearings.
  • Wheel diameter affects acceleration and top speed: smaller wheels accelerate faster for tricks, larger wheels carry momentum for distance—choose by primary terrain.

Specs

Wheel Durometer78A soft – 101A hard
Wheel Diameter50mm street – 60mm+ cruiser
Bearing Size608: 8x22x7mm standard
Bearing ShieldMetal ZZ / Rubber 2RS / Open

Related searches

What to check before buying

  • Measure your deck width and truck axle length—wheels wider than the axle contact patch cause wheelbite and truck-hang-up on slides.
  • Inspect riding surface: smooth concrete park favors 95A–101A; cracked asphalt and gravel demand 78A–85A urethane at 56mm+ diameter.
  • Confirm bearing size: standard skate bearings are 8mm inner diameter, 22mm outer diameter, 7mm width—608ZZ/2RS is the universal standard.
  • Check wheel profile: rounded edges reduce hang-ups on grinds and slides; square edges grip more for bowl carving—match to your riding style.

FAQ

All Skateboard Wheels & Bearings buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.