Trail Gear Advisor

Photos from current listings. Actual item, color, and included accessories may vary.

Skateboard Bearing Buying Guide

Skateboard bearings are the precision steel (or ceramic) races and balls that let your wheels spin freely on the axle; the core trade-off is ABEC precision rating vs. real-world durability and speed under impact. Buyers should treat ABEC 5–7 steel with quality seals as the durable baseline, and skip unbranded high-ABEC or ceramic sets unless they understand the trade-offs.

Bearing Size:608 (8mm bore, 22mm OD, 7mm)ABEC Rating:ABEC 5–7 steel (ABEC 9+ diminishing returns)Shield Type:Rubber RS or metal ZZ (avoid open)Ball Material:Steel vs ceramic (steel for impact)
Typical price range$20.79 – $36.95

At a glance

Category
Skateboard Wheels & Bearings
Data updated
Nov 16, 2026

Current offers

Highlights

  • ABEC ratings measure dimensional precision only, not load capacity or impact strength; ABEC 5–7 steel is the practical sweet spot for skate and cruiser use.
  • Skate bearings are standard 608 (8mm bore, 22mm OD, 7mm width) — any 8mm axle skateboard wheel accepts them.
  • Seals matter more than ABEC for street durability: rubber-shielded (RS) or metal-shielded (ZZ) bearings resist grit; open or non-sealed bearings wear fast outdoors.
  • Ceramic bearings reduce weight and resist rust but are brittle under curb impacts; steel with good seals is the better value for street and park.

Best use cases

  • Best for street and park skating: sealed steel ABEC 5–7 (or branded skate-specific bearings) — prioritize seals and impact resistance over raw ABEC number.
  • Best for cruisers and longboards: sealed steel ABEC 7 or quality branded bearings for smooth roll; skip cheap unbranded high-ABEC sets that wear out quickly.
  • Wrong fit: open or non-shielded bearings for outdoor use, and ceramic bearings for curb-heavy street skating where impacts can crack balls.

Buying tips

  • Buy 608-size bearings (8mm bore) — the universal skate standard; confirm the axle is 8mm, not 10mm (rare on specialty trucks).
  • Match ABEC to use: ABEC 5 for street durability, ABEC 7 for smooth cruiser roll; ABEC 9 and above offer diminishing returns and often mean thinner lubricant.
  • Prefer rubber-sealed (RS) or metal-shielded (ZZ) bearings for outdoor grit; pack with grease for street, light oil for park speed.
  • For a full setup you need 8 bearings per board (2 per wheel); buying a set of 8 or 16 ensures spares or a full swap.

Specs

Bearing Size608 (8mm bore, 22mm OD, 7mm)
ABEC RatingABEC 5–7 steel (ABEC 9+ diminishing returns)
Shield TypeRubber RS or metal ZZ (avoid open)
Ball MaterialSteel vs ceramic (steel for impact)

Related searches

What to check before buying

  • Confirm wheel axle hole is 8mm — 608 bearings slide in; 10mm axles need 6900-series bearings.
  • Check wheel durometer and use: soft cruiser wheels pair well with sealed ABEC 7 for roll; hard street wheels with sealed ABEC 5 for impact.
  • Verify bearing shields are rubber (RS) or metal (ZZ) for outdoor riding — avoid open bearings.
  • Ensure you have bearing spacers and washers if your trucks/wheels require them for proper load distribution.

FAQ

All Skateboard Wheels & Bearings buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.