Spitfire Skate Wheel Buying Guide
Spitfire Skate Wheel refers to the urethane wheels produced by Spitfire, a leading brand in skateboarding, available in various formulas, shapes, and durometers. The primary trade-off is between softer, more forgiving urethane for rough terrain and harder, faster urethane for smooth parks, with shape and width affecting lock-in and flip speed. The clear decision rule: match durometer and shape to your primary terrain and trick style—soft for crusty streets, hard for smooth parks, and classic shapes for technical flip tricks.
At a glance
- Price range
- Price range not synced yet
- Category
- Skateboard Wheels & Bearings
- Data updated
- Nov 16, 2026
Current offers
Highlights
- Spitfire offers three main urethane formulas: Formula Four (F4) for increased speed and flatspot resistance, Classic for a traditional feel, and Bighead for park/transition.
- Durometer ranges from 99a to 101a (F4) and 80a to 97a for softer cruiser options; higher numbers roll faster on smooth surfaces but transmit more vibration.
- Wheel shapes include Classic (narrow, lightweight for flip tricks), Conical (wider contact patch for stability), and Radial (rounded edges for lock-in on transitions).
- F4 wheels are branded as flatspot-resistant and typically last longer than standard urethane, but they cost more and may feel less forgiving on rough ground.
Best use cases
- Best fit: street skating on rough asphalt—choose 99a-101a F4 Classic shape for a balance of speed and durability, or softer 80a-97a for cruising; skip hard wheels if your streets are heavily cracked.
- Best fit: skatepark and transition—pick 99a-101a F4 Conical or Radial for stable lock-in and speed on smooth concrete; avoid narrow Classic shapes if you mainly skate bowls.
- Best fit: technical flip tricks—use 99a-101a F4 Classic in smaller diameters (51-53mm) for reduced swing weight; wrong fit: wide Conical shapes add rotational mass and slow flip tricks.
Buying tips
- Match durometer to terrain: 99a-101a for smooth parks and ledges, 97a and below for rough streets and cruising; harder wheels roll faster but are less forgiving.
- Select wheel diameter based on truck height and trick type: 51-53mm for technical street (lighter, quicker flips), 54-56mm for transition and vert (more speed and stability).
- Choose shape by skating style: Classic for flip tricks, Conical for stability on rails and ledges, Radial for lock-in on ramps—wider contact patches slow flip initiation.
- Verify you are buying genuine Spitfire wheels: check for the Spitfire logo and formula markings on the urethane, and buy from authorized skate shops to avoid counterfeit urethane.
Specs
| Formula Type | Formula Four / Classic / Bighead |
|---|---|
| Durometer Range | 80a-101a (soft to hard) |
| Wheel Shape | Classic / Conical / Radial |
| Diameter Range | 50mm-60mm |
Related searches
What to check before buying
- Check your deck width and truck axle width: wheels wider than your truck axle can cause wheel bite; match wheel width to truck width for proper clearance.
- Confirm your truck height accommodates your wheel diameter: larger wheels (55mm+) may require riser pads to prevent wheel bite on tight turns.
- Assess your local terrain: rough asphalt benefits from softer durometer (80a-97a), while smooth concrete parks favor harder (99a-101a) for speed.
- Ensure your bearings match your wheels: standard 608 bearings fit all Spitfire wheels; consider bearing spacers for proper side load support.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
