Metolius Training Board Buying Guide
A Metolius training board is a dedicated hangboard for finger and forearm strength, typically made from solid wood or composite resin. The core trade-off is between jaw-friendly wood grip and skin-friendly resin grip versus edge depth and hold variety that determine training progression. Buy wood for daily skin-friendly hangs; choose resin or a multi-depth board only if you already have a structured program and need aggressive edge selection.
Material:Solid wood vs composite resinEdge Depth:8–30 mm (model-dependent)Mounting:Stud/backer required, hardware includedBoard Width:24–36 in typical
At a glance
- Price range
- Price range not synced yet
- Category
- Climbing Chalk & Training
- Data updated
- Nov 16, 2026
Current offers
Highlights
- Metolius boards split into wood series (e.g., Wood Grips, Campus Board) and resin series (e.g., Simulator, Contact), with wood being gentler on skin and resin offering sharper, more aggressive edges.
- Edge depth typically ranges from 10–30 mm on entry-level boards to 8–20 mm on advanced models; shallower edges increase difficulty and require more finger strength.
- Hangboard construction uses solid hardwood (oak, maple) for durability and consistent texture, or composite resin for complex hold shapes and weather resistance.
- Metolius boards are generally designed for vertical mounting with included hardware; some models support adjustable or reversible mounting for varied edge depths.
Best use cases
- Best fit: Buy a Metolius Wood Grips board if you train 3–5 times per week and want minimal skin wear—ideal for daily hangs and rehab.
- Best fit: Choose a Metolius Simulator or Contact resin board if you follow a structured hangboard program and need precise edge depths for progressive overload.
- Wrong fit: Skip any Metolius board if you cannot install it securely into wall studs or a proper mounting board—hangboards require structural anchoring.
- Wrong fit: Do not buy an aggressive resin board as your first hangboard if you have less than 6–12 months of climbing experience; start with a wood board with deeper edges.
Buying tips
- Measure your doorframe or wall space: most Metolius boards are 24–36 inches wide; ensure at least 18 inches of clear vertical space above and below the board for safe hangs.
- Check stud spacing: hangboards must be mounted into wall studs (typically 16 or 24 inches on center) or a reinforced plywood backer—never drywall alone.
- Match edge depth to your ability: beginners should use 20–30 mm edges; intermediate climbers 15–20 mm; advanced climbers 8–15 mm for maximal finger strength gains.
- Verify included hardware: Metolius boards typically include mounting screws, but you may need additional lag bolts or a backer board for secure installation.
Specs
| Material | Solid wood vs composite resin |
|---|---|
| Edge Depth | 8–30 mm (model-dependent) |
| Mounting | Stud/backer required, hardware included |
| Board Width | 24–36 in typical |
Related searches
What to check before buying
- Confirm wall or doorframe location with studs at 16 or 24 inches on center and at least 18 inches of clear space above and below the mounting point.
- Check ceiling height: you need enough room to hang with arms fully extended without your feet touching the floor—typically 7–8 feet of clearance.
- Ensure the mounting surface is solid (wood studs, concrete, or plywood backer); drywall alone will not support body weight.
- Verify you have the required tools: drill, stud finder, level, and appropriate fasteners (lag bolts for studs, masonry anchors for concrete).
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
