Future Side Bite Buying Guide
Future Side Bite fins are the small, replaceable outer fins in a thruster or quad setup that use the Futures dual-tab base and a single grub screw, and their performance hinges on foil template, base fit, and material stiffness. The core trade-off is between flexible, forgiving composite fins for small or weak surf and stiffer honeycomb or carbon fins for drive and control in powerful waves. Choose a fin with the exact Futures base depth and a foil that matches your board’s tail width and your weight, or you will get either a loose, skittery feel or a locked, tracky one.
At a glance
- Price range
- Price range not synced yet
- Category
- Surf Fins, Leashes & Wax
- Data updated
- Nov 18, 2026
Current offers
Highlights
- Futures side bites use a dual-tab base about 0.75 in deep with a single 10-32 grub screw per fin; any base shallower or wider will rock and strip the box.
- Foil area and sweep decide release: a side bite with less than about 12 sq in area and high sweep pivots loosely, while 14–16 sq in with lower sweep adds drive and hold.
- Material grade is the stiffness lever: fiberglass composite flexes and forgives, honeycomb core stiffens the tip for speed, and solid carbon is the stiffest and most reactive.
- Side-bite height typically runs 3.5–4.5 in; going taller than your center fin’s height by more than 0.5 in makes the board over-finned and sluggish off the top.
Best use cases
- Best fit: a thruster or 2+1 longboard ridden in waist-to-head-high surf where you want quicker rail-to-rail release—pick a fiberglass composite side bite around 3.8–4.2 in tall.
- Best fit: a quad or thruster in punchy, fast waves where you need drive and hold—pick a honeycomb or carbon side bite with 14–16 sq in area and moderate sweep.
- Wrong fit: a small-wave groveler under 5 ft 8 in—skip stiff carbon side bites and choose a flexier composite so the board does not feel over-finned and tracky.
- Wrong fit: a Futures twin or keel setup—do not buy a standard side bite; those boards take a dedicated twin or keel template with a different base and foil.
Buying tips
- Match base first: the Futures dual-tab base needs a box about 0.75 in deep and 4.5 in long; measure your existing fin’s tab height and length before buying any replacement.
- Use the area rule: side-bite area should be roughly 25–35% of your center fin area—a 4.5 in center fin pairs with a 3.5–4.0 in side bite, not an equal-height fin.
- Match stiffness to weight and wave power: riders under about 150 lb in soft waves want fiberglass flex; riders over about 180 lb in steep waves want honeycomb or carbon for hold.
- Keep the set consistent: buy side bites as a pair from the same template and material, because mixing a flex fin with a stiff fin makes the board turn asymmetrically.
Specs
| Base System | Futures dual-tab / single screw |
|---|---|
| Side Bite Height | 3.5–4.5 in |
| Material Stiffness | Fiberglass / Honeycomb / Carbon |
| Setup Compatibility | Thruster, quad, 2+1 |
Related searches
What to check before buying
- Measure the Futures fin box: tab slot depth near 0.75 in and length near 4.5 in; a worn or shallow box will not clamp a new side bite securely even with the screw tight.
- Confirm your center fin height and area so the side bites land at 25–35% of center-fin area rather than guessing by eye.
- Check your board’s fin configuration—thruster (3), quad (4), or 2+1—and buy only the number and template that configuration requires.
- Inspect the grub screw and plate: Futures boxes use a 10-32 screw, and a stripped screw or missing plate means the fin will loosen no matter how good the foil is.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 18, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
