Under Armour Rash Guard Buying Guide
Under Armour rash guards are compression and loose-fit UV-protective tops built for surfing, swimming, and sun-heavy water sports, using synthetic knits rather than neoprene. The core trade-off is fit compression versus freedom of movement: tight compression improves muscle support and reduces chafing under a wetsuit, while loose fit maximizes airflow and easy on/off. Choose by construction — flatlock seams, UPF rating, and four-way stretch — not by brand name alone.
At a glance
- Price range
- Price range not synced yet
- Category
- Surf Wetsuits & Rash Guards
- Data updated
- Nov 16, 2026
Current offers
Highlights
- HeatGear fabric is the lightest, most compressive tier; ColdGear adds brushed interior for cold-water layering; Tech 2.0 is a looser, everyday training cut.
- UPF 30+ is the baseline for most UA rash guards; UPF 50+ models use denser knit or added UV blockers — critical for long surf sessions.
- Flatlock seam construction prevents rash under arms and across chest; overlock seams chafe when worn under a wetsuit for hours.
- Four-way stretch (elastane blended with polyester or nylon) is required for paddle reach; two-way stretch restricts shoulder rotation.
Best use cases
- Under-wetsuit base layer: pick a tight-fitting HeatGear compression long-sleeve with flatlock seams and UPF 30+; skip loose-fit or cotton-blend tops that bunch and stay wet.
- Tropical surfing and warm-water sun protection: choose a loose-fit short-sleeve or long-sleeve UPF 50+ rash guard; skip compression fit if you overheat easily or need quick removal between sessions.
- Pool laps and chlorinated water: select a polyester-rich (not nylon-rich) compression top with high chlorine resistance; skip ColdGear brushed interiors that hold water and dry slowly.
- Board sports layering in cool wind: wear a ColdGear compression mock under a 2mm neoprene top; skip Tech 2.0 loose cuts that flap and trap water in wind.
Buying tips
- Measure chest and waist, then size down one size from your t-shirt size for compression fit; size true for loose fit — UA compression tops run snug by design.
- Check fiber content: 80–90% polyester or nylon with 10–20% elastane gives four-way stretch; below 5% elastane means poor recovery and bagging at shoulders.
- Match sleeve length to activity: long-sleeve for surf and sun, short-sleeve for pool and high-output paddling; mock neck adds neck protection without hood bulk.
- Look for flatlock stitched seams and a tagless neck label — both prevent chafing during multi-hour water sessions.
Specs
| Fabric Blend | Polyester/nylon + 10-20% elastane |
|---|---|
| UV Protection | UPF 30+ to UPF 50+ |
| Fit Type | Compression vs Loose fit |
| Seam Construction | Flatlock vs Overlock stitched |
Related searches
What to check before buying
- Confirm your wetsuit size allows a 0.5–1mm base layer: a compression rash guard adds roughly one size of bulk at chest and shoulders.
- Check UPF rating on the hang tag — UPF 30+ blocks about 97% of UV, UPF 50+ blocks about 98%, but wet stretch fabric loses protection over time.
- Verify chlorine or saltwater exposure frequency: polyester survives chlorine better than nylon, which degrades and yellows faster in pools.
- Ensure you have a changing mat and fresh-water rinse bottle — rash guards retain sand and salt in seams and need rinsing after every session.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
