Photos from current listings. Actual item, color, and included accessories may vary.
78a Skateboard Wheel Buying Guide
78a skateboard wheels are soft cruiser wheels rated 78 on the durometer A scale, trading slide and park speed for vibration damping and grip on rough asphalt. The core decision is urethane formula and width: wide contact patches and rebound-rich compounds absorb road chatter, while narrow, harder-poured soft wheels feel sluggish and flat-spot quickly. Buy 78a for commuting and crusty pavement; step to 95a+ if you plan to slide, ollie stairs, or ride smooth concrete parks.
At a glance
- Category
- Skateboard Wheels & Bearings
- Data updated
- Nov 16, 2026
Current offers
Highlights
- Durometer: 78A sits at the soft end; softer than 90A park wheels and much softer than 99A+ street wheels
- Roughness damping: soft urethane absorbs cracks and pebbles but wears faster and flat-spots under heavy sliding
- Width matters: 60mm+ diameter with wide contact patch rolls over debris; narrower 54-57mm is lighter and quicker
- Glow-in-the-dark and aqua colorways are cosmetic urethane additives; they do not change durometer or rebound
Best use cases
- Best fit: commuting and cruising on cracked asphalt or brick — pick 60-65mm diameter, 78A, wide contact patch
- Best fit: cruiser or longboard setups needing grip in damp conditions — 78A urethane holds better than 90A+ on wet-ish pavement
- Wrong fit: skatepark bowls and stair sets — 78A is too grippy and slow; use 99A-101A instead
- Wrong fit: downhill sliding — soft 78A chunks and flat-spots; use 80A-83A slide-specific formulas
Buying tips
- Match wheel diameter to your deck: 60mm+ risks wheelbite on standard trucks; add risers or pick 54-57mm
- Check bearing seat: standard 608 bearings fit all 78A wheels; confirm the wheel ships with bearings or buy separately
- Prefer centerset or offset cores for even wear; sideset cores cone faster on cruiser setups
- Buy 4-packs only — singles are rare and mismatched durometer batches ride unevenly
Specs
| Durometer | 78A soft cruiser |
|---|---|
| Diameter Range | 54-65mm |
| Bearing Seat | Standard 608 |
| Contact Patch | Wide (30-40mm) |
Related searches
What to check before buying
- Measure deck width and truck axle length — 60mm wheels need at least 8.0in deck width to avoid bite
- Confirm truck height and add 1/8in risers if upgrading from 53mm to 60mm+ wheels
- Check wheelbite clearance by standing on the board and leaning before riding
- Verify bearing compatibility: 608 standard, and whether bearings are included or sold separately
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.


