Bone Big Ball Bearing Buying Guide
Bones Big Ball Bearings are a specific high-performance skate bearing design using larger 3/16-inch balls instead of standard 1/8-inch balls, trading some top-end speed for dramatically increased impact durability. The core trade-off is ball size versus rolling efficiency: bigger balls resist flat-spotting and axial shock from slams and stairs, but create more contact friction at high RPM. Choose Big Balls for street, vert, and heavy-impact skating; choose standard Bones Swiss or Reds for pure park speed and long-distance rolling.
At a glance
- Price range
- Price range not synced yet
- Category
- Skateboard Wheels & Bearings
- Data updated
- Nov 16, 2026
Current offers
Highlights
- Big Ball architecture uses six 3/16-inch steel balls per bearing versus seven or eight 1/8-inch balls in standard skate bearings, increasing load capacity and shock resistance.
- Bones Big Balls ship with removable rubber shields on both sides and high-speed nylon ball retainers; the retainers keep balls evenly spaced under heavy side-loads.
- The model line splits by cage and lube: Big Balls Reds use a single non-contact shield and light oil for instant break-in; Big Balls Swiss use Swiss-made steel and removable shields for serviceability.
- Standard skate bearing dimensions are 8mm inner diameter, 22mm outer diameter, and 7mm width (608ZZ); Big Balls fit every standard 8mm axle and wheel hub without adapters.
Best use cases
- Pick Big Balls for street and vert skating: the 3/16-inch balls survive repeated stair gaps, curb impacts, and heavy landings that flat-spot 1/8-inch bearings.
- Skip Big Balls for longboard pushing, downhill, and distance cruising: the larger ball contact patch adds rolling resistance and heat at sustained speed; choose Bones Swiss or Ceramics instead.
- Choose Big Balls Reds for budget-conscious street setups that need durability over race speed; choose Big Balls Swiss only if you want serviceable shields and Swiss steel at a higher tier.
- Wrong fit: slalom, freestyle, and tech-slide skating where minimal rolling resistance and quick acceleration matter more than impact survival.
Buying tips
- Confirm your wheels use standard 608 bearing seats (22mm outer diameter); Big Balls are a direct drop-in for Bones, Spitfire, and most street wheel hubs.
- Match bearing count to your setup: skateboards and street wheels need 8 bearings total (2 per wheel); buying a set of 8 is cheaper than two 4-packs.
- Choose the Reds tier for oil-lubed, low-maintenance street use; choose the Swiss tier only if you will actually remove and clean shields rather than replace bearings.
- Avoid mixing Big Balls with worn axles or bent hangers; the larger ball load path transmits misalignment directly into the race and shortens life.
Specs
| Ball Size | 3/16 in (vs 1/8 in standard) |
|---|---|
| Bearing Size | 608: 8x22x7 mm |
| Shield Type | Rubber, removable (Swiss) / single (Reds) |
| Best Use | Street / vert impact vs park speed |
Related searches
What to check before buying
- Measure your axle diameter: Big Balls require 8mm axles; 7mm or 10mm axles need different bearing sizes entirely.
- Confirm wheel bearing seat depth is at least 7mm and the hub is not a micro-bearing or specialty core.
- Check that your skate tool or bearing press matches 8mm inner race; do not hammer bearings in with a socket that contacts the shield.
- Verify you have 8 bearings for a complete board; spare bearings are worth carrying because a single flat-spotted Big Ball ruins the set's feel.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
