Photos from current listings. Actual item, color, and included accessories may vary.
Bone Skate Wheel Buying Guide
Bones skate wheels are Powell Peralta's urethane wheel lines, split by durometer and formula into Street/Tech (83B-84B, 103A-104A), Park/ATF (81B-84B, 97A-101A), and old-school reissues like Rat Bones (85A-90A). The core trade-off is urethane hardness versus rebound: harder, higher-rebound formulas roll faster and slide predictably on smooth concrete, while softer, higher-ounce formulas absorb rough asphalt and curb impacts. The decision rule: match durometer to surface first (rough pavement = 85A-90A, smooth park = 99A-104A), then match width and shape to your riding style and axle standard.
At a glance
- Category
- Skateboard Wheels & Bearings
- Data updated
- Nov 16, 2026
Current offers
Highlights
- Bones' proprietary STF (Street Tech Formula) and SPF (Super Pro Formula) urethanes are graded on the B-scale (83B-84B), roughly equivalent to 103A-104A on the A-scale — dramatically harder and faster-rolling than standard 99A-101A park urethane.
- Powell Peralta Rat Bones reissues are 60mm x 40mm with a 85A or 90A durometer in the classic wide, rounded shape — built for old-school cruiser and pool setups, not modern street flip tricks.
- Wheel diameter drives acceleration versus top speed: 52mm-54mm accelerates quicker and flips easier, 56mm-60mm holds speed better on transitions and rough ground, 64mm+ is strictly cruiser/vert territory.
- Bearing seat and axle compatibility are standardized: almost all Bones wheels use a 22mm bearing seat for 608-size bearings (8mm axle), so bearing choice (Swiss, Reds, ceramics) is independent of wheel model.
Best use cases
- Best fit: smooth skatepark bowls and ledges — pick 54mm-56mm Bones STF or SPF at 83B-84B for fast, predictable slides and reduced flat-spotting. Skip soft 85A reissues here; they grip too hard and slow you down.
- Best fit: rough street asphalt and cruising — pick 56mm-60mm Rat Bones at 85A-90A for vibration damping and impact absorption. Skip 103A+ street wheels; they chatter and flat-spot on gritty pavement.
- Best fit: old-school pool and cruiser builds — pick the 60mm Rat Bones reissue for period-correct width and stance. Skip narrow modern street shapes; they look and ride wrong on wide vintage trucks.
- Wrong fit for everyone: mixing a 64mm+ wheel with standard street trucks without risers — wheel bite is guaranteed. Size wheels to your truck height and deck concave, not just preference.
Buying tips
- Set durometer by surface: 85A-90A for rough asphalt and cruiser comfort, 97A-101A for mixed park/street, 103A-104A (83B-84B) for smooth concrete and technical sliding. Don't buy harder than your local terrain supports.
- Choose diameter by discipline: 52mm-54mm for flip tricks and acceleration, 55mm-58mm for all-around park, 59mm-64mm for vert speed and cruising. Every 2mm step changes pop timing noticeably.
- Confirm the B-scale conversion before comparing across brands: Bones 83B is roughly 103A and 84B roughly 104A — a 'B' number is not the same as an 'A' number and buying the wrong scale makes wheels feel dramatically harder or softer than expected.
- For replica builds, treat Rat Bones as a geometry purchase: 60mm x 40mm wide with a rounded profile pairs with 149mm-169mm trucks and 1/8-inch risers to avoid bite on old-school decks.
Specs
| Durometer Scale | B-scale (83B-84B) vs A-scale (85A-104A) |
|---|---|
| Wheel Diameter | 52mm-64mm (street to cruiser) |
| Urethane Formula | STF/SPF vs Rat Bones reissue |
| Bearing Seat | 22mm seat / 608 bearing / 8mm axle |
Related searches
What to check before buying
- Measure your deck width and truck axle width: a 60mm Rat Bones wheel needs roughly 149mm-169mm trucks and a deck wide enough to avoid overhang; 52mm-54mm street wheels suit 139mm-149mm trucks.
- Check wheel-well clearance and riser need: any wheel above 56mm on standard-height trucks typically requires 1/8-inch risers to prevent wheel bite during hard turns.
- Verify bearing seat and axle: Bones wheels take standard 608 bearings on 8mm axles — confirm your bearings are 608 and your trucks are 8mm, not 10mm downhill axles.
- Match durometer to climate and floor: hot smooth concrete favors 99A-104A, cold or coarse asphalt favors 85A-90A; very soft urethane flat-spots faster under heavy sliding.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.



