Photos from current listings. Actual item, color, and included accessories may vary.
Bone Skateboard Wheel Buying Guide
Bone skateboard wheels are Powell Peralta's urethane line (Bones, Rat Bones, G-Bones), defined by durometer and shape rather than brand hype. The core trade-off is hardness (97A+ for slide/park speed) versus softness (85A–90A for rough pavement grip and shock absorption). Buy by durometer and width first; if a wheel lacks a printed durometer and a defined riding style, treat it as a compromise.
At a glance
- Category
- Skateboard Wheels & Bearings
- Data updated
- Nov 16, 2026
Current offers
Highlights
- Bones urethane uses a hardness scale where 97A is a hard, fast park/street wheel and 85A–90A is a soft, grippy cruiser or old-school wheel.
- Wheel diameter sets roll speed and clearance: 60mm and 64mm roll faster over cracks; 52–56mm accelerates quicker for technical street tricks.
- Contact patch width controls slide vs grip: narrow street shapes break loose for slides; wide old-school shapes (Rat Bones) hold grip on rough ground.
- Bones bearings use standard 608 (8mm axle) sizing, so any wheel installs on standard trucks without adapters.
Best use cases
- Park and bowl skating: pick G-Bones 64mm 97A — hard, fast, and stable at speed; skip soft cruiser urethane that scrubs speed on transitions.
- Rough street and cruising: pick Rat Bones 60mm 85A for grip and vibration damping; skip 97A+ wheels that chatter and slip on gravel.
- Technical street tricks: pick a smaller 52–56mm hard wheel; skip 60mm+ wide shapes that add rotational weight and slow flip tricks.
- Old-school reissue builds: pick Rat Bones 60mm 85A or 90A to match period-correct geometry; skip modern narrow street shapes if authenticity matters.
Buying tips
- Match durometer to surface: 97A–101A for smooth concrete parks, 85A–90A for asphalt and rough streets; never run 101A on coarse pavement.
- Choose diameter by discipline: 52–56mm for flip tricks, 58–64mm for bowls, cruising, and covering distance with fewer pushes.
- Confirm 608 bearing compatibility (8mm axle) and that your trucks accept the wheel width without excessive axle overhang.
- Use hardness as the primary filter: a 90A wheel grips and wears slower on rough ground; a 97A slides predictably but flats faster on abrasive surfaces.
Specs
| Durometer | 85A soft to 97A+ hard |
|---|---|
| Wheel Diameter | 52–64 mm |
| Bearing Standard | 608 / 8 mm axle |
| Wheel Shape | Narrow street vs wide old-school |
Related searches
What to check before buying
- Measure deck width and truck axle length so the wheel width fits without the axle poking past the nut.
- Check your riding surface: smooth park concrete justifies 97A+; cracked asphalt and gravel demand 85A–90A.
- Verify bearings are standard 608 (8mm) and that you have spacers and washers for a rattle-free fit.
- Confirm wheel diameter clears your deck's wheel wells and doesn't cause wheel bite at full lean.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.



