Trail Gear Advisor

Photos from current listings. Actual item, color, and included accessories may vary.

Bone Super Red Bearing Buying Guide

Bones Super Reds are a mid-tier skate bearing built for skaters who want faster spin and longer life than budget Reds without stepping up to full ceramics. The key trade-off is steel vs. ceramic ball composition: standard Super Reds use high-quality steel balls in a Swiss-style race, while Ceramic Super Reds swap in silicon nitride balls for corrosion resistance and reduced friction. Buy standard Super Reds for street and park use where impact and dirt are constant; choose Ceramic Super Reds only if rust resistance or reduced rolling weight justifies the premium.

Ball Material:Steel vs Silicon Nitride CeramicAxle Fit:8mm standard skate axleBearing Seat:22mm wheel seat / standard spacerShield Type:Removable rubber / serviceable
Typical price range$39.59

At a glance

Category
Skateboard Wheels & Bearings
Data updated
Nov 16, 2026

Current offers

Highlights

  • Standard Super Reds use hardened steel balls in a Swiss-pattern race with light synthetic oil, giving faster acceleration than Bones Reds but requiring periodic cleaning.
  • Ceramic Super Reds substitute silicon nitride ceramic balls for steel, cutting rotating mass and eliminating rust on the ball surface, though the steel races can still corrode.
  • Both tiers are 8mm inner-diameter bearings sized for standard skateboard axles and fit any wheel with a 22mm bearing seat and standard spacer.
  • Super Reds ship with removable rubber shields and light oil rather than heavy grease, so they spin freely out of the box but need more frequent maintenance than sealed greased bearings.

Best use cases

  • Pick standard Super Reds for street, park, and transition skating where impacts are frequent and you want more speed than Reds without ceramic pricing.
  • Pick Ceramic Super Reds for humid climates, coastal areas, or wet-weather skating where rust resistance matters more than saving money.
  • Skip both tiers for heavy downhill or freeride use where bearing heat and sustained speeds favor full ceramic or high-load steel race bearings with grease packing.

Buying tips

  • Confirm your wheels use standard 8mm axles and a 22mm bearing seat; Super Reds will not fit 10mm downhill axles or micro-bearing wheels without adapters.
  • Choose standard Super Reds if you skate in dry conditions and clean bearings regularly; the steel balls perform near ceramic levels until dirt or moisture enters.
  • Choose Ceramic Super Reds only if rust is your primary failure mode; the ceramic balls resist corrosion but the steel races still require the same cleaning schedule.
  • Match shield type to maintenance habits: rubber shields pop out for cleaning but admit more dirt; keep them seated and clean often if you skate dusty parks.

Specs

Ball MaterialSteel vs Silicon Nitride Ceramic
Axle Fit8mm standard skate axle
Bearing Seat22mm wheel seat / standard spacer
Shield TypeRemovable rubber / serviceable

Related searches

What to check before buying

  • Measure your axle diameter at 8mm and your wheel bearing seat at 22mm before ordering; Super Reds are not compatible with 10mm or micro-bearing setups.
  • Check that your wheels include a bearing spacer and speed washers; running Super Reds without a spacer side-loads the bearings and shortens life.
  • Assess your local climate: high humidity or coastal air makes Ceramic Super Reds worth the upgrade, while dry climates favor standard Super Reds.
  • Confirm you have a bearing press or are comfortable seating bearings with a truck axle; Super Reds fit tight and should never be hammered in.

FAQ

All Skateboard Wheels & Bearings buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.