Bone Swiss Ceramic Bearing Buying Guide
Bone Swiss Ceramic Bearings are a premium skate bearing tier using ceramic balls (silicon nitride) in a Swiss-precision steel race, built for speed retention and corrosion resistance. The core trade-off is ceramic's lower friction and rust immunity versus steel's impact toughness and lower cost. The decision rule: buy ceramic only if you skate in wet/humid conditions or compete for speed and accept careful installation; otherwise standard Swiss steel delivers 90% of the performance at half the fragility risk.
At a glance
- Price range
- Price range not synced yet
- Category
- Skateboard Wheels & Bearings
- Data updated
- Nov 16, 2026
Current offers
Highlights
- Ceramic balls (Si3N4) are ~40% lighter than steel and won't rust, but the steel races still corrode if water intrudes—grease and shields matter as much as the balls.
- Swiss manufacturing denotes raceway precision (ABEC-7 equivalent or better) and a patented frictionless shield design; 'Swiss' is a quality tier, not a country-of-origin claim for the whole bearing.
- Ceramic bearings are brittle under point loads—improper pressing with a hammer or sideways axle torque can crack balls; use a bearing press and keep axle nuts snug, not overtightened.
- Bone's standard Swiss Ceramic uses removable rubber shields for cleaning; the 'Super Swiss 6' variant uses six larger balls for higher load capacity and impact resistance at a small speed penalty.
Best use cases
- Best fit: Wet-climate street/park skaters who routinely ride through puddles—ceramic balls won't rust, so bearings survive rain sessions that would seize steel.
- Best fit: Downhill and longboard speed chasers wanting lower rolling resistance for sustained high RPM—pair with hard wheels (83A+) and precision trucks.
- Wrong fit: Street skaters doing big stair sets and heavy impact—ceramic's brittleness and higher cost make steel Swiss the smarter, more forgiving choice.
- Wrong fit: Budget-first beginners—entry-level steel bearings roll fine for learning; ceramic's price premium buys durability, not beginner-visible speed.
Buying tips
- Match bearing bore to axle: all standard skate bearings are 8mm ID × 22mm OD × 7mm W; longboard/tricks with 10mm axles need 10mm-ID bearings or reducer sleeves—verify axle diameter before ordering.
- Choose the 6-ball variant for impact-heavy street skating and the 7-ball standard for speed/downhill; ball count trades load capacity against rolling friction.
- Buy from authorized dealers with sealed packaging—counterfeit Bones bearings are common; genuine sets include a Bones sticker and consistent shield branding.
- Budget for a bearing press and cleaning kit; ceramic bearings reward periodic degreasing with isopropyl alcohol and light grease, and neglect erodes the speed advantage.
Specs
| Bearing Size | 8mm ID × 22mm OD × 7mm W (standard) |
|---|---|
| Ball Material | Silicon nitride ceramic vs steel |
| Precision Grade | Swiss / ABEC-7 equivalent or better |
| Ball Count | 7-ball standard / 6-ball impact |
Related searches
What to check before buying
- Measure your axle diameter (8mm standard, 10mm downhill) and wheel bearing seat depth—confirm your wheels take standard 22mm-OD bearings without spacers.
- Inspect wheels for worn bearing seats; a sloppy seat lets bearings rock and crack ceramic balls regardless of bearing quality.
- Confirm riding environment: if you skate wet/salty roads regularly, ceramic's rust immunity justifies the premium; dry indoor parks don't need it.
- Have a bearing press or shop access lined up—hammer installation voids the ceramic durability advantage and risks cracking balls.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
