Trail Gear Advisor

Bronson Raw Bearing Buying Guide

Bronson Raw Bearings are a skate-specific, non-serviceable bearing line engineered for street and park abuse, distinguished from generic ABEC-rated bearings by their high-tolerance steel races, low-viscosity factory lubricant, and reinforced ball retainers. The core trade-off is between raw speed (low drag, fast break-in) and long-term grime resistance—Bronson Raw favors speed and impact durability over sealed, maintenance-free longevity. Buy Bronson Raw if you skate daily in dry conditions and accept periodic cleaning; skip them if you need fully sealed, all-weather bearings or prefer serviceable shields for wet climates.

Bearing Size:608: 8mm bore / 22mm OD / 7mmShield Type:Non-contact removable rubberLubricant:Light factory oil (not grease)Ball Retainer:Reinforced polyamide cage

At a glance

Price range
Price range not synced yet
Category
Skateboard Wheels & Bearings
Data updated
Nov 16, 2026

Current offers

No verified match right now. Browse live listings:

Highlights

  • Bronson Raw uses a non-contact, removable rubber shield (raw = no contact seal) that cuts drag vs contact-sealed bearings but lets fine dust in faster—clean every 4–6 weeks in dry street use.
  • The line runs on deep-groove steel races with a low-friction factory oil (not heavy grease), giving faster roll speed than standard ABEC-7 grease-packed bearings but requiring re-oiling after wet exposure.
  • Bronson Speed Co. tiers the Raw below the G3 and above budget stock bearings; Raw uses a reinforced polyamide ball retainer rated for high impact, which resists cracking better than nylon cages in cheap bearings.
  • Raw bearings are non-serviceable in the sense that the shield is removable but the ball retainer is not user-replaceable—once races pit from grit or rust, the bearing is spent, so buy a set of 8 and rotate.

Best use cases

  • Best fit: street and park skaters riding dry concrete or wood who want faster roll and impact durability and will clean/re-oil bearings monthly—pick Bronson Raw in 8-pack.
  • Best fit: riders upgrading from generic ABEC-7 stock bearings who want a known skate-specific tolerance and low-drag lubricant without stepping up to full ceramic pricing.
  • Wrong fit: wet-climate or winter commuters—skip Raw and choose a contact-sealed, grease-packed bearing (e.g., Bronson G3 or a sealed ABEC-7) because Raw shields let water in.
  • Wrong fit: skaters who never maintain gear—skip Raw and buy fully sealed, service-free bearings; Raw reward routine cleaning and punish neglect with rust and pitting.

Buying tips

  • Buy in sets of 8 (two wheels per truck) and confirm the listing is an 8-pack—single bearings or 4-packs leave you short for a full board.
  • Match bearing size to wheel core: standard skate wheels use 608 bearings (8mm axle, 22mm OD, 7mm width)—verify your wheels are not micro or specialty cores before ordering.
  • Bronson Raw ships with a light oil, not grease; plan to re-oil with a skate bearing lubricant after every wet ride or monthly in dusty parks to prevent race pitting.
  • Choose Raw over ceramic only if you accept steel rust risk; ceramic balls resist corrosion but Bronson Raw steel races still need dry storage—store boards indoors, not in damp garages.

Specs

Bearing Size608: 8mm bore / 22mm OD / 7mm
Shield TypeNon-contact removable rubber
LubricantLight factory oil (not grease)
Ball RetainerReinforced polyamide cage

Related searches

What to check before buying

  • Confirm your skateboard wheels take standard 608 bearings (22mm outer diameter, 8mm inner bore) and that your axles are 8mm—most street/park trucks are.
  • Check your riding environment: dry street/park suits Raw; if you routinely ride through puddles or wet streets, pick a sealed bearing instead.
  • Have a bearing press or socket set on hand—Bronson Raw are press-fit and removing them with a screwdriver can damage the shield and races.
  • Confirm the listing includes 8 bearings and spacers if your wheels need them; some Bronson packs ship bearings only, so verify spacer inclusion separately.

FAQ

All Skateboard Wheels & Bearings buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.