Electric Longboard Wheel Buying Guide
Electric longboard wheels are the urethane or rubber contact patches that transfer motor torque to the road, and the core trade-off is softness for grip and ride comfort versus hardness for range and durability. Durable options use high-rebound urethane in the 75A–80A range with reinforced cores and ABEC-7 or better bearings, while compromises use generic 70A-or-softer urethane that chunks under torque or hard 83A+ formulas that slide and wear fast. Pick by drive system (hub vs belt) and wheel diameter compatibility first, then match durometer to pavement quality and rider weight.
At a glance
- Price range
- Price range not synced yet
- Category
- Skateboard Wheels & Bearings
- Data updated
- Nov 16, 2026
Current offers
Highlights
- Hub-motor boards use proprietary slotted or magnet-ring wheels (typically 90–105 mm) that must match the motor sleeve exactly; belt-drive boards accept standard skate wheels with a pulley cutout (typically 85–110 mm).
- Durometer is the defining performance metric: 75A–78A urethane grips and absorbs vibration but wears quicker, 80A–83A balances range and durability, and 85A+ is for smooth asphalt and high-speed sliding only.
- Wheel cores matter as much as urethane — reinforced nylon or aluminum cores resist torque deformation on dual-motor setups, while basic plastic cores can crack at the spoke junction under 2 kW+ loads.
- Bearings ship in ABEC-7/ABEC-9 or ILQ-9 grades; higher ABEC is not automatically better for street use, and sealed rubber-shield bearings outlast metal-shield units in wet or dusty conditions.
Best use cases
- Best fit: belt-drive commuter boards on mixed pavement — choose 85–90 mm, 78A–80A wheels with a standard kegel or abec pulley cutout for grip and parts availability.
- Best fit: hub-motor boards — buy only wheels explicitly listed as compatible with your motor's slot count and diameter; generic skate wheels will not mount and can strip the hub sleeve.
- Wrong fit: off-road or gravel use — standard 78A urethane street wheels chunk and lose traction; use pneumatic or 120 mm+ all-terrain wheels instead.
- Wrong fit: high-speed downhill or sliding — soft electric-board urethane overheats and chunks; use dedicated 83A+ downhill formulas on a non-electric setup.
Buying tips
- Match wheel diameter to your board's pulley ratio and deck clearance: going from 90 mm to 100 mm raises top speed roughly 11% but cuts torque and range, so re-gear or accept the trade-off.
- Use the durometer number, not marketing names: 75A–78A for rough pavement and comfort, 80A–83A for range and wear, and avoid anything softer than 75A on dual-motor boards above 2 kW.
- Check the pulley interface before buying: Kegel (10-hole) and ABEC (6-hole) cutouts are not interchangeable, and hub boards need exact motor-sleeve compatibility with no universal standard.
- Buy replacement bearings in sealed rubber-shield ABEC-7 or ILQ-9 grade and replace all eight at once; mismatched bearing wear causes wheel wobble and uneven urethane wear.
Specs
| Drive Compatibility | Hub motor vs belt pulley (Kegel/ABEC) |
|---|---|
| Wheel Diameter | 85–110 mm street / 120 mm+ AT |
| Durometer Range | 75A soft to 83A hard (78A–80A all-round) |
| Bearing Grade | ABEC-7/9 or ILQ-9, sealed |
Related searches
What to check before buying
- Measure your current wheel diameter (typically 85–110 mm) and confirm the replacement matches or re-gear for the circumference change.
- Identify your drive type — hub motor sleeve dimensions or belt pulley cutout pattern (Kegel vs ABEC) — before ordering any wheel.
- Weigh rider plus cargo: riders above 100 kg should choose reinforced cores and 80A+ durometer to avoid chunking and core fatigue.
- Confirm bearing seat diameter (22 mm standard for skate wheels) and axle size (8 mm or 10 mm) match your trucks.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
