Trail Gear Advisor

Large Skateboard Wheel Buying Guide

Large skateboard wheels (typically 56mm–75mm+) trade acceleration and lightweight pop for higher roll speed, obstacle roll-over, and rough-surface comfort. The core trade-off is durometer and urethane formula: harder 99A+ wheels last longer and slide predictably on smooth concrete, while softer 78A–87A wheels absorb vibration and grip on asphalt but flat-spot faster under hard sliding. The decision rule is simple: match wheel diameter to your terrain and truck clearance, and match durometer to surface roughness—never buy a large wheel without confirming your deck's wheel wells and truck height can clear it.

Wheel Diameter:56–75mm+ (street 56–60, cruiser 65+)Durometer Range:78A soft to 101A+ hardBearing Seat:Standard 608 (8x22x7mm)Urethane Formula:High-rebound vs standard pour

At a glance

Price range
Price range not synced yet
Category
Skateboard Wheels & Bearings
Data updated
Nov 16, 2026

Current offers

No verified match right now. Browse live listings:

Highlights

  • Diameter tiers: 56–60mm is the largest size that still pops quickly on a standard street deck; 65–75mm+ is longboard/cruiser territory requiring riser pads or drop-through decks.
  • Durometer scale: 78A–87A soft urethane grips rough asphalt and dampens vibration; 95A–99A hard urethane rolls fast on smooth concrete and slides cleanly; 100A+ is ice-like and best for tech sliding.
  • Urethane formula and pour quality determine rebound and flat-spot resistance more than durometer alone—high-rebound formulas return energy and resist chunking under heavy riders.
  • Wheel width and contact patch: a wider contact patch (e.g., 32–40mm) adds grip and stability at speed but increases weight and drag; narrow centers slide easier and accelerate faster.

Best use cases

  • Best fit: pick 56–60mm 99A–101A wheels for street and park skating on smooth concrete—large enough to roll over cracks but light enough to pop and flip.
  • Best fit: pick 65–75mm 78A–85A wheels for cruising, commuting, and rough asphalt—soft urethane and large diameter absorb vibration and roll over debris that stops small hard wheels.
  • Wrong fit: do not mount 65mm+ wheels on a standard street deck with low trucks—wheel bite will throw you; you need riser pads (1/8–1/2 inch) or a drop-through longboard deck.
  • Wrong fit: avoid soft 78A wheels for technical sliding or park skating—they grip too hard, flat-spot quickly, and slow down lip tricks and slides.

Buying tips

  • Measure your deck's wheel wells and truck height first: a 65mm wheel on standard-height trucks typically needs at least a 1/4-inch riser pad to avoid wheel bite.
  • Match durometer to surface: below 90A for asphalt and rough pavement, 95A–99A for smooth skatepark concrete, 100A+ only for dedicated slide courses.
  • Check bearing seat compatibility: standard skate bearings are 608 (8mm axle, 22mm outer diameter, 7mm width)—all standard skate wheels accept them, but some large wheels ship with wider hubs requiring longer axles.
  • For heavy riders (over 200 lbs), choose high-rebound urethane in 83A–88A or 97A–99A and avoid cheap 78A formulas that chunk and flat-spot under load.

Specs

Wheel Diameter56–75mm+ (street 56–60, cruiser 65+)
Durometer Range78A soft to 101A+ hard
Bearing SeatStandard 608 (8x22x7mm)
Urethane FormulaHigh-rebound vs standard pour

Related searches

What to check before buying

  • Confirm your deck's wheel cutouts and truck height: measure the gap between the wheel mounting point and the deck underside—large wheels need clearance plus riser pads.
  • Verify your truck axle length matches wheel width: standard axles fit most wheels, but extra-wide downhill wheels may require wider hangers.
  • Check your riding surface: smooth concrete favors hard 95A+ wheels; rough asphalt and brick demand soft 78A–87A urethane.
  • Ensure you have the correct bearing size (608 standard) and a bearing press or shop service if the wheels ship without bearings installed.

FAQ

All Skateboard Wheels & Bearings buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.