Photos from current listings. Actual item, color, and included accessories may vary.
Longboard Bearing Buying Guide
Longboard bearings are the steel or ceramic rolling elements that sit inside your wheels and determine how fast, smooth, and reliably your board rolls. The core trade-off is precision and corrosion resistance versus cost and serviceability: ABEC ratings describe dimensional tolerance only, not load capacity or speed, while material grade and seal type dictate real-world durability. The clear decision rule is to buy bearings with known steel grade (G10 or better), non-contact or contact seals matched to your climate, and standard 608 dimensions—skip unbranded bearings with no material or tolerance data.
At a glance
- Category
- Skateboard Wheels & Bearings
- Data updated
- Nov 16, 2026
Current offers
Highlights
- Longboard bearings are universally 608 size (8mm bore, 22mm OD, 7mm width), so fit is never the variable—only steel grade, cage material, and seal type change performance.
- ABEC 1–11 measures raceway dimensional tolerance in ten-thousandths of an inch; ABEC 7+ reduces play and rolling friction but does not imply stronger steel or longer life.
- Steel grade matters more than ABEC: G10 high-carbon chrome steel is the durability floor, G25/G40 polished races roll smoother, and ceramic (Si3N4) balls resist corrosion but are brittle under impact.
- Seal architecture decides maintenance: rubber contact seals block water and dust but add drag; non-contact shields run faster but let grit in—pick based on wet or dry riding.
Best use cases
- Best for daily commuting and cruising in dry conditions: non-contact shielded bearings in G10 steel—low drag and adequate grit resistance without the drag penalty of contact seals.
- Best for rain, coastal, or winter riding: contact-sealed stainless or ceramic-hybrid bearings—the seal and corrosion resistance outweigh the extra rolling resistance.
- Wrong fit: buying ABEC 9/11 bearings for downhill or freeride—high-precision races offer no load advantage and cost more; spend on G25 steel and quality grease instead.
- Wrong fit: ceramic full-ball bearings for street impact or curb drops—brittle balls can crack; use steel or ceramic-hybrid with steel races for impact-heavy riding.
Buying tips
- Match seal to climate: contact rubber seals for wet or dusty roads, non-contact metal shields for dry cruising—contact seals cost roughly 5–10% in roll speed but multiply bearing life in rain.
- Buy by steel grade before ABEC: G10 chrome steel is the minimum for longboard loads; G25 or G40 races roll noticeably smoother and last longer than any ABEC label on budget steel.
- Standard 608 bearings fit every longboard wheel with an 8mm axle—no sizing math needed; just confirm your truck axle is 8mm (not 10mm) and that spacers are included.
- Ceramic-hybrid (ceramic balls, steel races) is the practical upgrade for corrosion resistance; full-ceramic is race-only and not worth the cost for street or cruiser use.
Specs
| Bearing Size | 608: 8mm bore / 22mm OD / 7mm |
|---|---|
| Steel Grade | G10 minimum; G25/G40 smoother |
| Seal Type | Contact rubber vs non-contact shield |
| Ball Material | Chrome steel / ceramic-hybrid / full ceramic |
Related searches
What to check before buying
- Confirm your truck axle diameter is 8mm—standard longboard trucks are 8mm, but some downhill trucks use 10mm and require different bearing bore.
- Check wheel core type: standard 608 bearings press into most longboard wheels, but some oversized cores accept only specific bearing ODs—measure wheel bore before buying.
- Verify bearing spacers and speed washers are included or available—spacers prevent side-loading and are required for proper bearing life on longboards.
- Assess your riding environment: wet or salty roads demand contact seals and stainless or ceramic-hybrid; dry climate allows non-contact shields for lower drag.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.

