Trail Gear Advisor

Photos from current listings. Actual item, color, and included accessories may vary.

Longboard Wheel Buying Guide

Longboard wheels are the primary contact patch that dictates grip, roll speed, and ride comfort, defined by urethane durometer, contact patch width, and core stiffness. The core trade-off is soft, wide, offset wheels for plush cruising versus hard, narrow, centerset wheels for predictable slides and downhill control. Buy by durometer and contact patch geometry for your discipline—not by brand hype or bearing claims.

Durometer Range:75a soft – 86a hard (78a cruising)Wheel Diameter:65–76mm (70mm all-around)Contact Patch:30–65mm (55mm+ for grip)Core Placement:Centerset / Offset / Side-set
Typical price range$40.00 – $60.00

At a glance

Category
Skateboard Wheels & Bearings
Data updated
Nov 16, 2026

Current offers

Highlights

  • Durometer ranges: 75a–80a soft for rough pavement grip and vibration damping; 83a–86a hard for slide initiation and speed; 78a is the all-around cruising standard.
  • Contact patch width matters more than diameter for grip: 55–65mm patches hold fast in corners, 30–40mm patches break loose predictably for freeride.
  • Core placement changes slide behavior: centerset cores wear evenly and slide symmetrically; offset cores add grip and rail stability for downhill; side-set cores drift best.
  • Urethane depth (thane depth) determines wheel life: tall lips and deep urethane absorb impact and last longer; thin lips are lighter but flat-spot faster.

Best use cases

  • Best for cruising and commuting: pick 70–75mm diameter, 78a–80a durometer, 50–60mm contact patch, centerset or slightly offset—soft enough for cracks yet fast on smooth asphalt; skip sub-65mm hard wheels that transmit every pebble.
  • Best for downhill and fast freeride: choose 70–76mm, 78a–83a with offset cores and square lips for grip and predictable release; skip narrow side-set slide wheels that lack braking traction at speed.
  • Best for technical sliding: use 65–70mm, 83a–86a centerset or side-set wheels with rounded lips and small contact patches; skip wide soft cruising wheels that grip unpredictably and flat-spot when slid.

Buying tips

  • Match wheel diameter to deck: 70–76mm wheels need drop-through or cutout decks to avoid wheelbite; 65–70mm suits top-mount decks with standard trucks and no risers.
  • Use durometer as your first filter: below 80a for rough roads and comfort, 80a–83a for mixed cruising and mild sliding, 84a+ for dedicated freeride and park.
  • Buy wheels in matched sets of four with the same durometer batch; mixing worn and new wheels on one board causes uneven wear and unpredictable slide initiation.
  • Bearings are consumable and cross-compatible: standard 608ZZ/608-2RS bearings fit any longboard wheel; prioritize ABEC-7 or better with rubber seals for wet or dusty conditions, and budget to replace them before blaming the wheels.

Specs

Durometer Range75a soft – 86a hard (78a cruising)
Wheel Diameter65–76mm (70mm all-around)
Contact Patch30–65mm (55mm+ for grip)
Core PlacementCenterset / Offset / Side-set

Related searches

What to check before buying

  • Measure your deck's wheel wells and truck width: confirm 70mm+ wheels clear the deck edges at full lean, or plan for a drop-through deck or 1/8-inch risers.
  • Weigh rider load and terrain: heavier riders and rough asphalt favor 78a–80a with wider contact patches; lighter riders on smooth concrete can run 83a+ without harshness.
  • Confirm axle compatibility: standard 8mm skateboard axles accept all longboard wheels; check that your truck's axle length leaves at least 2–3 threads exposed after the nut.
  • Verify climate: wet or dusty environments demand sealed (2RS) bearings and harder urethane that resists water absorption; soft 75a wheels can chunk in freezing temperatures.

FAQ

All Skateboard Wheels & Bearings buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.