Offroad Skateboard Wheel Buying Guide
Offroad skateboard wheels are oversized, soft-durometer wheels engineered to roll over dirt, gravel, grass, and cracked pavement where standard 52-56mm park wheels stall or sink. The core trade-off is diameter and urethane hardness: larger diameters (90-105mm+) clear obstacles and maintain momentum, while softer compounds (78A-85A) absorb vibration but wear faster and reduce slide control. The decision rule is simple: buy wheels at least 90mm with a 78A-83A durometer and a compatible truck/riser setup for true offroad use; anything smaller or harder is a hybrid cruiser compromise, not an offroad wheel.
At a glance
- Price range
- Price range not synced yet
- Category
- Skateboard Wheels & Bearings
- Data updated
- Nov 16, 2026
Current offers
Highlights
- Offroad capability starts at 90mm diameter; 90-105mm wheels roll over gravel and roots, while 65-75mm 'all-terrain' wheels only handle rough pavement and packed dirt.
- Urethane hardness of 78A-83A delivers the grip and shock absorption needed on loose surfaces; 85A+ wheels transmit trail chatter and lose traction on gravel.
- Wheel contact patch width of 55-65mm stabilizes soft-ground riding; narrower contact patches sink and wash out on dirt and grass.
- Mounting oversized wheels requires truck risers (typically 1/4-inch to 1/2-inch) and longer hardware to prevent wheel bite and maintain turning clearance.
Best use cases
- Best fit: Dirt, gravel, and grass trail riding — choose 95-105mm wheels at 78A-80A with a 60mm+ contact patch and 1/2-inch risers on a dedicated offroad deck.
- Best fit: Rough urban pavement and cracked asphalt — 90mm wheels at 80A-83A give a smoother ride without the weight and wheel-bite risk of 100mm+ setups.
- Wrong fit: Skatepark and street tricks — offroad wheels are too large and soft for ollies, grinds, and slide control; use 52-56mm 99A-101A park wheels instead.
- Wrong fit: Downhill speed runs — soft 78A urethane grips but overheats and chunks at speed; downhill requires 70-75mm 78A-80A wheels with a stone-ground contact patch.
Buying tips
- Match wheel diameter to terrain: 90-95mm for packed dirt and gravel paths, 100-105mm for loose gravel, roots, and grass where maximum rollover is required.
- Select durometer by surface: 78A-80A for dirt and grass traction, 80A-83A for mixed gravel and pavement, and avoid 85A+ for anything looser than hardpack.
- Check truck compatibility: standard 8-inch trucks accept most offroad wheels, but 10-inch+ trucks are needed for 65mm+ contact patches to avoid bearing strain and wobble.
- Budget for risers and hardware: add 1/4-inch to 1/2-inch risers and 1.5-inch to 2-inch mounting bolts to every offroad wheel purchase; without them, wheel bite is guaranteed.
Specs
| Wheel Diameter | 90-105mm offroad; 52-56mm park |
|---|---|
| Urethane Durometer | 78A-83A offroad; 99A+ park |
| Contact Patch | 55-65mm offroad; 30-40mm park |
| Riser Requirement | 1/4-1/2 inch for 90mm+ |
Related searches
What to check before buying
- Measure your deck's wheel wells and truck height — 90mm+ wheels require at least 1/4-inch risers and often a deck with cutouts or a drop-through mount.
- Confirm your truck axle length matches the wheel contact patch — 8-inch trucks fit 55-60mm contact patches; 65mm+ patches need 10-inch trucks.
- Verify bearing seat diameter is standard 22mm and buy bearings rated for the load — offroad wheels stress bearings more, so use steel or ceramic, not basic ABEC-3.
- Check your riding surface composition — loose sand and deep mud exceed any urethane wheel's capability; offroad skate wheels are for packed dirt, gravel, grass, and rough pavement.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
