Orangatang Longboard Wheel Buying Guide
Orangatang longboard wheels are a premium urethane formula line defined by four durometers and three core architectures that directly control grip, slide predictability, and roll speed. The primary trade-off is durometer hardness versus contact patch width: softer wheels absorb road vibration but wear faster, while harder, narrower wheels slide easier but transmit more shock. The clear decision rule is to match the wheel's durometer and shape to your primary discipline (freeride, downhill, cruising, or dancing) rather than buying a single 'all-around' set.
At a glance
- Price range
- Price range not synced yet
- Category
- Skateboard Wheels & Bearings
- Data updated
- Nov 16, 2026
Current offers
Highlights
- Orangatang's four durometers are color-coded: 77a (blue, softest grip), 80a (orange, freeride balance), 83a (yellow, slide initiation), and 86a (purple, hardest and fastest roll).
- Core architecture matters: the 'In Heat' core is a tall, offset design for downhill stability, while the 'Peewee' and 'Fat Free' use narrower, centerset cores for freeride and cruising.
- Contact patch widths range from roughly 30mm (Fat Free) to 56mm (4President), directly scaling grip and slide resistance—wider patches grip harder but break traction less predictably.
- All Orangatang wheels use a proprietary urethane formula that resists chunking and flat-spotting better than generic 78a-83a cast wheels, but they still wear faster than harder 90a+ wheels on rough asphalt.
Best use cases
- Choose 80a In Heat or 4President if you freeride downhill and need predictable slide initiation with enough grip to control speed—skip 77a for any slide-heavy riding.
- Choose 77a Fat Free or Stimulus if you cruise, carve, or dance on smooth pavement and prioritize vibration damping—skip these for downhill or technical sliding.
- Choose 83a or 86a Durian or Peewee if you want maximum roll speed and easy slide outs on freeride or tech-slide setups—skip these on wet or coarse roads where grip is critical.
Buying tips
- Match durometer to surface temperature: 77a grips well below 60°F, 80a is versatile in mild weather, and 83a+ slides best above 70°F—softer wheels overheat and chunk in hot climates.
- Check your truck axle length before buying: Orangatang wheels are typically 65-70mm diameter and 30-56mm wide, so a 180mm truck accommodates most shapes without wheel bite.
- For freeride, pick a centerset core (Fat Free, Peewee) to flip wheels and extend life; for downhill, pick an offset core (In Heat) to maintain grip under lateral load.
- Buy a full set of four matched durometer wheels—mixing durometers front-to-rear is only for advanced tuning and complicates slide symmetry.
Specs
| Durometer Range | 77a / 80a / 83a / 86a color-coded |
|---|---|
| Core Type | Centerset vs Offset (In Heat) |
| Wheel Diameter | 65mm to 70mm typical |
| Contact Patch | 30mm to 56mm width range |
Related searches
What to check before buying
- Measure your deck's wheel wells and truck width: Orangatang 4President (70mm x 56mm) can cause wheel bite on narrow 150mm trucks or drop-through decks without cutouts.
- Confirm your riding surface: smooth concrete or park favors 77a-80a, while coarse asphalt or wet conditions demand 80a+ to avoid chunking.
- Verify your bearings are standard 608 (22mm outer diameter) — Orangatang wheels use standard 608 bearing seats and include spacers with most sets.
- Check local climate: sustained temperatures above 90°F accelerate wear on 77a-80a urethane, so consider 83a+ for hot-weather freeride.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
